Search the Community
Showing results for tags 'acceleration'.
Found 2 results
I have a 2000 Arctic Cat 300 4 wheeler. I have been having some carburetor issues. So i bought a new carb. Now I'm having these issues. The unit will start and idle fine, when i go to accelerate it wants to cut off. So i checked to make sure it was getting gas and the fuel filter will be full of gas and then once the carb opens the filter drains down and will not refill quick enough to run. So i checked to make sure gas was flowing to the filter and it is flowing fine through the line. I remove the filter and run the gas line directly to the carb and the engine idle fine and then it will run good as i ride it for about 10 minutes then it will start with the same issues again i cannot accelerate enough to move the 4 wheeler. Every time i accelerate the unit will cut off. What is wrong with this thing. My 400 Arctic Cat is doing the same thing except it will backfire, I'm lost i have tried everything i know to do, what am i missing here. Thanks for your help
oldskoolhookers posted a topic in Suzuki ATV ForumAltough I new to the forum I not new to riding. I have been riding for a few years at different parks around the Houston area and enjoy every minute I get to ride. Just recently I have encountered a problem with my quad. After riding the trails I had helped someone back to their vehicle by pulling them. Their front ball joint had snapped so I put my quad in reverse to pull him so I could watch and make sure nothing happened. Ever since then when I go in reverse under heavy acceleration my quad boggs down. I can use the over ride button with no problem when pushed. I have already replaced the belt and cleaned the clutch plates really well. I am at a lose. Any suggestions? 2007 Suzuki King Quad 700 4X4 Thanks