Search the Community

I purchased a quad with engine problems. The previous owner had pulled the motor and pulled the valve cover but decided to stop. I have done Arctic Cat top ends before but have never worked on the bottom end so any advise would be appreciated. What I have found so far is the connecting rod bearing is completely gone and some scoring on the jug walls. What i'm wondering is if anybody here has worked on these and if so did you replace all the bearings or just the ones that were for sure bad? Also is the 2006 Suzuki King Quad 700 motor exactly the same? It seems Suzuki parts are a lot cheaper to buy.

Help guys PLEASE I have an artic cat 700 mud pro 2012. I was riding it the other day and it started skipping after i shut if off that day it was the last time it would crank. it was showing codes 12 and 13 then disappeared and THEN EFI on the dash but now it's not showing. it will turn over but it will not crank. it's not getting spark either I dont believe

Hey fellas, I've been referring to this forum a bunch over the years , but finally needed to create an account for some help,, so this is my first post. I'm working on a friend's 06 Arctic Cat 700efi that has no spark whatsoever and am kinda at a loss. To begin with, he had tried to fix it himself so he had replaced alot already...I know, I know lol. This is what has been done; New plug twice, new coil twice with new one ohming out great, new stator, new rectifier, and new starter solenoid. . The biggest frustration is that I've got no codes. ECU shows that I'm in neutral and my brake safety switch works. I also show 12.5v at the tilt sensor pin on ecu which I assume is correct and then if u flip, then u lose voltage. Am I right, or no? Only other things I can think to do is replace Crank position sensor, get a peak voltage meter and read my peak voltages, or replace ecm which obviously is last resort. I also verified the pulse coil. Thank you in advance

I have a 2010 Arctic Cat 700 EFI and the display does not work. We unplugged the pod overnight and it still does not light up at all. What other things can we check?

View File 2010 Arctic Cat 700 Diesel SD ATV Service Manual 2010 Arctic Cat 700 Diesel SD ATV Service Manual This Arctic Cat Service Manual contains service, maintenance, and troubleshooting information for the 2010 Arctic Cat 700 Diesel SD ATV. The complete manual is designed to aid service personnel in service-oriented applications. This manual is divided into sections. Each section covers a specific ATV component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. When using this manual as a guide, the technician should use discretion as to how much disassembly is needed to correct any given condition. The service technician should become familiar with the operation and construction of each component or system by carefully studying the complete manual. This manual will assist the service technician in becoming more aware of and efficient with servicing procedures. Such efficiency not only helps build consumer confidence but also saves time and labor. Submitter Admin Submitted 03/07/2021 Category Arctic Cat ATV  

View File 2007 Arctic Cat 700 EFI 4x4 Wiring Diagram 2007 Arctic Cat 700 EFI 4x4 Wiring Diagram Submitter Admin Submitted 06/29/2019 Category Arctic Cat ATV