Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Similar Forum Topics
Sorry for my English, I live in Ukrane, Kharkiv.
I have Can Am Renegede 800, 2007, g1, mileage is 430 hours. Happened issue with chain in first cylinder. Mechanic opened engine and found problems with piston, rings, cylinder, etc. So engine need full rebuild.
I found rebuild kit on ebay. https://www.ebay.com/itm/06-10-Can-Am-Outlander-800-800R-Stock-Cylinder-Crank-Complete-Engine-Rebuild-Kit/253868930525?fits=Make%3ACan-Am&hash=item3b1bc475dd:g:NdMAAOSwew5a-bY9
Price is really good. For example original crankshaft costs $929.99. Here full kit costs $999. This kit made by BP Racing ATV Company. Here is their website https://bpracingatv.com/
But I can’t find reviews to their products. My mechanics didn’t used parts from BP Racing ATV before. And their parts not very popular in Ukraine. I’m afraid that I will spent money for this kit + delivery + pay to mechanic for a work and will need new engine rebuild after 100 hours.
What is the quality of parts from BP Racing ATV?
Is it have sence to buy this kit, or pay more and buy original parts?
Maybe someone used this kits for rebuild engine. And have expirence of using this parts. What will your mind about quality of parts from BP Racing?
Thanks for your answers.
'11 Grizz 700 here. Since I've got some warm weather these next couple days I've decided to start the bike after about a year of just sitting. Took out the plug and sprayed a good amount of fogging oil on top of the piston to help lubricate things. After about a minute of letting it soak I stuck my air line tubing in to suck out the excess, but it seems like I didn't get nearly as much in return. Repositioned the tube enough so that everything that was gonna come out pretty much did. I'll probably shoot some compressed air down the plug hole before doing the start just to make sure it's all out, as well as cranking it for a second before putting the plug back in. How long would it take for a bit of standing fogging oil to seep past the piston rings, and where would it go? I guess into the engine oil? The oil was fairly new the last time it was started but I'm sure it could stand to be changed after sitting for so long. If much of this fogging oil got into the engine oil should I do the change before the startup?
While riding my Quadzilla XLC 500 I was cruising along about 60 mph then opened it up, but once I hit 70-75 mph it died on me so I rolled to a stop and it wouldn't start for about 20-30 seconds. I then noticed the Temp light occasionally flashes on but its so quick you wouldn't notice in the day so not sure how long its been happening. The engine has started pinging when I accelerate which can be caused by many things so I drained the fuel and replaced with hi octane, fitted a new spark plug, adjusted the little washer on the high jet in the carb twice to make it run more lean which made no difference. I tested the thermostat which opens at the correct temperature, I removed the radiator cap and started the engine and no bubbles were showing and the oil is on maximum and very clean as I have not long serviced it.
The last time I took it out I went 14 miles and the coolant in the bottle has dropped about 1/2".
I am now leaning towards a head gasket and have purchased a full gasket kit but was wondering if there's anything else it could be before taking the engine apart.
Anyone out there spice up their 2002 Kawasaki Lakota Sport 300 with cam, shaved head, deck the jug, valves?
As you probably have already seen, I have a top end to get built back up and might as well add a little kick to it. Here's a pic of a golf cart I built up recently and modified the engine a little while I had it apart.
Thanks in advance for everyone's help!!
I bought a '02 Lakota Sport and had a few pieces missing, looks like someone ripped it apart, lost interest and all the parts removed got trashed. Anyhow, not really sure where to start, but there does seem to be more Bayou parts available.
Does anyone have a breakdown of parts (or years) of the bayou that are the same as the Lakota?
Similar Tagged Content
So i was riding the other day and my quad randomly shut off. It started back up and ran completely fine for a little while and then it started idling terribly.
I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before.
It will run and idle decent now but when I give it gas it dies.
Does anybody know what could be wrong?
I also changed the spark plug and air filter along with the oil and oil filter.
AL righty I did some trading around this weekend and ended up picking up a few 4 wheelers for cheap. I ended up with this one for $500 in it total and well the guy told me it dropped a valve. I haven't really messed with it at all. But this weekend I am going to try and start working on it some to get it running before winter time frame. So what I am asking is a couple of questions.
1. First off where do I start I tried pulling the pull cord and could not get it to move at all.
2. I need to get a service manual for this 4 wheeler where can I get it downloaded for free?
3. what do I need to look for and how do I go about this really. I do have experience with 4 wheelers but this one is a little different to me than others because its a V2 and I have no clue where to start internal on the engines. Most of my experience is on the outside portion of troubleshooting on theses wheelers.
Please no smart butt answers as i am new to here but just wanted opinions on where to start. Please and thanks wink:
Recently Browsing 0 members
No registered users viewing this page.