Quantcast
Jump to content

Need ID on Hose

ABNjk09

By ABNjk09
in Polaris ATV Forum

 Share

Recommended Posts

ABNjk09 Newbie

ABNjk09

Posted
Posted

Hi All,

This is my first ATV and I'm picking it apart to learn about it. I noticed this tube hanging and can't figure out what it is. Can someone ID it for me and tell me where it plugs on to? It's a 2000 Xpedition 425. (Blue arrow points to the one I'm talking about.)

I'm also looking for some real basic parts diagrams so I can learn more about this thing. If someone knows of anything similar to what I've posted for a Jeep feel free to point me in the right direction.

Thanks!

UNK Tube.jpg

2012_JK_Undercarrage_Labled.jpg

57d7734de3cb1_UNKTube.jpg.f50d0b8cca2f5e7bc4bc54aa9d57b0f9.jpg

2012_JK_Undercarrage_Labled.jpg.2bd76e8f9bc8087871f329c56389599f.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • HeWasRidinDirty
      2002 Xpedition 325 start relay/solenoid
      By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

    • middlebrookgt
      2006 LT-F400F stator/generator cover change: What is the best way to check that all is good with the transfer operation before reassembling?
      By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
    • AnthonyT
      First time ATV buyer
      By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • Suzukiquad
      Favorite or go to Mod for all four wheelers
      By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
    • Frank Angerano
      My first trailer project.
      By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...