Quantcast
Jump to content

Recommended Posts

Posted (edited)

hi, my ignition on my 86 quad is erratic, I put a new trigger in, different color code so had wires reversed, changed them then I got spark, but still hard to start, is there a replacement ignition system or replacement box using same trigger, I am considering using my lighting coil output to rectify and charge a battery and see if I can find a DIY battery and coil ignition. Anyone have thoughts on this...thanks

Edited by Ajmboy
Moved to Suzuki forum and added year in topic title.
Posted
9 hours ago, jimtr6 said:

hi, my ignition on my 86 quad is erratic, I put a new trigger in, different color code so had wires reversed, changed them then I got spark, but still hard to start, is there a replacement ignition system or replacement box using same trigger, I am considering using my lighting coil output to rectify and charge a battery and see if I can find a DIY battery and coil ignition. Anyone have thoughts on this...thanks

I would get a different quad rather than add a battery.  The selling-point of the 86 230 is the light weight.

I would first swap spark plugs just to be sure it's not something simple.  Then, I would replace the power coil inside the magneto (opposite the lighting coil) as it almost certainly hasn't survived 30 years without enamel deterioration.  A sure sign of power coil deterioration is hard-starting when hot.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
×
×
  • Create New...