Quantcast
Jump to content

Recommended Posts

Posted (edited)

hi, my ignition on my 86 quad is erratic, I put a new trigger in, different color code so had wires reversed, changed them then I got spark, but still hard to start, is there a replacement ignition system or replacement box using same trigger, I am considering using my lighting coil output to rectify and charge a battery and see if I can find a DIY battery and coil ignition. Anyone have thoughts on this...thanks

Edited by Ajmboy
Moved to Suzuki forum and added year in topic title.
Posted
9 hours ago, jimtr6 said:

hi, my ignition on my 86 quad is erratic, I put a new trigger in, different color code so had wires reversed, changed them then I got spark, but still hard to start, is there a replacement ignition system or replacement box using same trigger, I am considering using my lighting coil output to rectify and charge a battery and see if I can find a DIY battery and coil ignition. Anyone have thoughts on this...thanks

I would get a different quad rather than add a battery.  The selling-point of the 86 230 is the light weight.

I would first swap spark plugs just to be sure it's not something simple.  Then, I would replace the power coil inside the magneto (opposite the lighting coil) as it almost certainly hasn't survived 30 years without enamel deterioration.  A sure sign of power coil deterioration is hard-starting when hot.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
×
×
  • Create New...