Quantcast
Jump to content

Recommended Posts

Posted

Hi i have a honda 350es 2002 4x4 (same as rancher but canadian edition). My problem is the clock and trip meter always resetting when i power off the bike. The trip meter reset to 0.0 and the clock flashing 1:00. The other function work normally gear shift, hourmeter and odometer. If i power off the bike for approx 2-5 seconds the clock and trip meter didnt reset. The battery is ok and all the fuse is ok. Can someone help me with this problem please. I found anything in my service manual.

thanks

  • 2 months later...
  • 3 years later...
  • 2 weeks later...
Posted

wow, you have this issue from 2017 and still no fix? I would think that there is an issue with getting power with key off to the trip meter unit. when you shut it off, it resets. I would try tracing wires to see. Get a wire diagram.

Posted
On 5/1/2021 at 8:43 AM, quadmaniac said:

wow, you have this issue from 2017 and still no fix? I would think that there is an issue with getting power with key off to the trip meter unit. when you shut it off, it resets. I would try tracing wires to see. Get a wire diagram.

yes i have this problem since 2017 it's not a big problem but it's annoying. No wire problem and no switch problem. I'm thinking is the cluster board itself, but i dont want to change for just this problem. Thank you for your reply

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
    • By 88classic
      I have (2) sets of brand new plastics available for Honda Rancher 420 2014-2023. These are genuine genuine OEM Honda plastics. One set is white and the other set is green. The boxes these are in are too big to ship.(Unless you want to pay for it. If so, lookup your own shipping rates from 17325 and box size is 58"x35"x18").  $400
       

       

×
×
  • Create New...