Quantcast
Jump to content

Recommended Posts

Posted

Hello all , looking for folks preferred brand and wt of oils to use in the Engine , transmission , differentials , coolant and brakes ... Also 100% synthetic media filter for engine oil .

Any response is appreciated .

 

Sent from my SM-G930V using Tapatalk

 

 

Posted

Engine oil: 0W-40 Mobil 1 full syn engine oil

Transmission: 5W-30 Mobil 1 full syn (you can use many different things in the tranny, its just a some gears, chains, and bearings) chaincase oil, dex 3 or 6, GL5, or engine oil

Coolant: any conventional green coolant works mixed 50/50

Brakes: Dot 4 brake fluid, valvoline

Rear final drive: Valvoline GL5 75W-90 syn

Front final drive: if its a hillard drive (mostly 2004 and newer polaris models) then I use polaris demand drive, if it has hillards on the hubs (2004 and older polaris models) the I use GL5, some people use ATF type F or ATF dex6 but I find I do not use much of the fluid so I just buy the polaris stuff.

  • Like 1
Posted
Engine oil: 0W-40 Mobil 1 full syn engine oil
Transmission: 5W-30 Mobil 1 full syn (you can use many different things in the tranny, its just a some gears, chains, and bearings) chaincase oil, dex 3 or 6, GL5, or engine oil
Coolant: any conventional green coolant works mixed 50/50
Brakes: Dot 4 brake fluid, valvoline
Rear final drive: Valvoline GL5 75W-90 syn
Front final drive: if its a hillard drive (mostly 2004 and newer polaris models) then I use polaris demand drive, if it has hillards on the hubs (2004 and older polaris models) the I use GL5, some people use ATF type F or ATF dex6 but I find I do not use much of the fluid so I just buy the polaris stuff.
Thanks for the response Sir !

Sent from my SM-G930V using Tapatalk

Posted

I'm open to other suggestions anyone has .

I'm partial to( Redline Oil) products ...anyone using Redline oil in there ATV's ?

 

Thanks for any response [emoji106]

 

Sent from my SM-G930V using Tapatalk

 

 

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By Mikey509
      Hi everyone, first and foremost, I want to thank everyone for all the help I've received. I am so glad I found this community. I also wanna apologize if I'm spamming the forum, I come up with questions as I go, I guess lol. So when I got my Recon, the air box was missing the lid, held together by zip ties, and the filter was ripped and nasty. I have since ordered a new air box assembly. It comes with everything: the box,  lid, and filter ( the insert and the foam), and all the hardware necessary. This is the first time I've seen a metal filter inside a foam filter lol. However, my question is, I have read that you have to oil these filters? Every time I read it, it was always skimmed over, and I could not remember where I had read it. Is there a certain oil needed for this? Is the filter washable and reusable? Do I just stick the filter in oil, lol? Sorry if it sounds like a dumb question. Thanks in advance, y'all!
    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
×
×
  • Create New...