Quantcast
Jump to content

Recommended Posts

Posted

Working on a buddys LT250, found the vin: JSAAJ45a 9L2106329   Get some help with the year? He didn't know, thinks it's a late 80's. This one needs lotsa luv!

 

Thanks.

0424181728.jpg

  • Like 1
Posted

Thanks for the info and the welcome AJM. Had not discovered that link, sweeeeeeeeeeet! Ol, KZ rider here. Been knuckle busting for a few decades now, hope to get more info and contribute here, as I can.

 

 

Cheers!

Posted (edited)

Yea, I know.... should start a new thread.

 

So, the oil (If you wanta call it that) was almost water. Flowed out freely! Oil/filter/seals, done. Still would not idle properly. Pulled the carb and found the main jet sitting in the bowl. That's NOT good. Reinstalled, buttoned everything back up and she's (almost) golden! Runs good, idles fine (for a 28yo ride) and will continue to work on a local farm.

 

Thanks again AJM... and appreciate the reaction Grizzly!

Cheers guys...

Edited by Seymore
Posted
On 4/27/2018 at 3:43 PM, Seymore said:

Yea, I know.... should start a new thread.

 

So, the oil (If you wanta call it that) was almost water. Flowed out freely! Oil/filter/seals, done. Still would not idle properly. Pulled the carb and found the main jet sitting in the bowl. That's NOT good. Reinstalled, buttoned everything back up and she's (almost) golden! Runs good, idles fine (for a 28yo ride) and will continue to work on a local farm.

 

Thanks again AJM... and appreciate the reaction Grizzly!

Cheers guys...

Those things will run forever if they're maintained. That's crazy that the oil was so bad and the main jet was sitting in the bowl...that can't be good 😋 Good luck with it on the farm!

Posted
7 hours ago, Ajmboy said:

Those things will run forever if they're maintained. That's crazy that the oil was so bad and the main jet was sitting in the bowl...that can't be good 1f60b.png Good luck with it on the farm!

Yea, no maintenance since he got it used, ~2 years ago... and before that, who knows? 

I was wondering why there was always a big puddle of fuel in the airbox. Now I know! :twitsy:

Oh, this is someone else's farm. Not mine. We'll see how soon (if/when) I get a call back on this. He did mention that it is now "surging". I suspect old fuel. Will be draining the old and replacing it with fresh non-eth.

 

  • Haha 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
    • By Asand211
      I've got a 1995 220 Bayou and the electric start does not work.  When I got it the machine was pretty rough but I was told it ran less than a year ago.  The key switch had been cut off and wires  twisted after the key was lost.  I bought a new ignition switch and repaired the wiring and it is working correctly.  It is in neutral and the neutral light is on when the key is turned on but I get nothing when pressing the start button.  I verified there is no voltage going to the starter from the solenoid.  The fuse in the solenoid is good.  Something I found that is odd is that I get positive voltage(12 volts) to the brown, black, and white wires that run into the solenoid when the key is on.  That doesn't make sense to me but I could be wrong.  I would appreciate any help I can get. Thank you in advance.  
    • By TravisCr
      I bought this from a buddy to plow snow up in the North Eastern Washington- its been getting oil in the water and I've been changing the oil often and adding collant as necessary-
      I've taken the stator cover off and I'm looking at the Oil Seal and water pump seal and they look good- Although I've ordered a factory oil Seal I'm looking at putting it in this afternoon-
      I don't have the factory service manual- am I suppose to Add RTV to the Stator cover Gasket? I've seen some folks suggest grease other suggest RTV?

      Any suggestions here- I'm trying to reassemble it tonight- I looked at downloading the manual but need to get up to 10 posts firsts it looks like-

      I appreciate any suggestions- normally I'm a jeep and honda dirt bike guy- but  I got a good deal on the quad and a plow so I went for it
      Its got a bit over 3K and runs pretty good- but I've had her tore apart for 3 weeks to figure out the oil in the coolant issue.
    • By Parham
      My old quad needs new tires.  I am having a hard time finding the OEM size 25x10-10.  Anyone running more readily available 25x11-10?  Any issues?
    • By Freddie
      My first quad and I have a problem. I have a Kawasaki Bayou 300 1997. When I start it. It will go on high idle for about ten seconds before it goes down to low idle. It does this even when I don't touch the throttle or the choke.
      Also, when I give it some throttle and let go. It will come back to fast idle for about ten seconds before it comes down to slow idle. Therefore I have to wait for it to slow up before I can shift. The throttle linkage drops right back to the stop on the carb buy the rpms stay up for a while. If you have any ideas what might be wrong please let me know. thank you Fred
×
×
  • Create New...