Quantcast
Jump to content


Alignment off? Check this first! Polaris ACE/Sportsman


Mike Lee

Recommended Posts

I have noticed, after repeated cases with our fleet of Polaris Aces, that the front control arms are weak pathetic pieces of junk.  They will bend quite easily when subjected to abuse off road.  Take a 6 inch ruler and hold it up against each leg of the lower control arms and check to ensure that they aren't bent.  This may save you a trip to the hospital as I've seen them snap in half!  A bent arm not only affects your toe (wheel direction) but also the camber. 

  • Like 1
Link to comment
Share on other sites

7 minutes ago, Mike Lee said:

I have noticed, after repeated cases with our fleet of Polaris Aces, that the front control arms are weak pathetic pieces of junk.  They will bend quite easily when subjected to abuse off road.  Take a 6 inch ruler and hold it up against each leg of the lower control arms and check to ensure that they aren't bent.  This may save you a trip to the hospital as I've seen them snap in half!  A bent arm not only affects your toe (wheel direction) but also the camber. 

Good feedback and info, thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • By bighoss
      i got my son new outlaw 50 a few weeks ago and we went rideing yesterday and while we were riding it died and it took me like 10 min to get started back and it died agen when we got close to truck so i pulled it back took the plug out it looked like it was drop in a bucket of gas took the air filter out and the ait box was full of gas also got home it started rite up today i started it it starter up but was blowing what look like water out of the exholst let it idel for a lil bit did not die but as soon as hit the gas and let off it will die what does that sound like i thnk i going to take it back to dealer and tell them to fix it as it is under warrenty but would like to know what it could be first
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
×
×
  • Create New...