Quantcast
Jump to content

96 big bear 4x4 no neutral light

Josh Cornelius

By Josh Cornelius
in Yamaha ATV Forum

 Share

Recommended Posts

Josh Cornelius Apprentice

Josh Cornelius

Posted
  • Author
Posted (edited)

aight.. it'll be a bit, I'm at work till 7 so it'll be dark but I should be able to get enough light on it.. this specific model the bodies were the same on the Timberwolves, bear trackers and wolverines.. but if I'm not mistaken, bear trackers only came in 2wd, this bike is 4wd so that should rule out bear trackers.. I hope.. lol.. and yes, waiting on parts sucks but well worth it.. if I'm off and I know the parts will be in, I sit outside and wait on the mail lady antsy as hell.. lol

Edited by Josh Cornelius
posted twice for some reason
Frank Angerano Grand Master

Frank Angerano

Posted
Posted

Wowwwwwwee that’s great.  Looks exactly like my bear tracker. But I don’t know if they make that in a 4x4. The 350   That’s a nice set of projects.   Do you have all the parts? plastics racks etc ? And more importantly the manuals ? I’m hoping you have everything and seeing them come back together will be cool and also rewarding.  

Do you have a budget in mind or a spending limit ? eBay  will be a big help on some used parts for whatever your missing. 

Good luck and any questions you might have I’m sure myself as well as many others here at Quadcrazy can help you out.  

Josh Cornelius Apprentice

Josh Cornelius

Posted
  • Author
Posted

I don't believe they made the bear tracker in 4x4.. but the bear tracker, timberwolf and wolverine of these models were identical.. and it was several years they all looked identical.. that's why it's so hard to tell what it is or the year model.. and yes, both bikes are complete except the mystery bike is missing the pull cord assembly and if the big bear had a factory winch, it's missing but if it didn't come with a winch then it's 100% complete.. no manuals for the big bear, but haven't checked the mystery bike yet.. I'm gonna go out on a limb tho and say it's gone.. lol.. but I'm gonna get new ones for both.. and it's gonna be very awesome seeing them revived considering they haven't been ran in close to 9 years.. they've just been sitting up in a grassy tomb.. as far as a budget, I didn't really wanna be over 1500 to 2000 because if I ever decided to sell them, that's about all I would get out of them.. but considering I got both together for 200 bucks, I should be well under that mark.. and I always use eBay for just about everything.. that's where I've gotten all the parts for the bear so far and found the hotshot performance cdi for it.. thanks, and hopefully I can be of help to yall one day and return the favor..

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Atomusthenes
      88 Honda four trax 300 4x4
      By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • Suzukiquad
      New member / quad lover
      By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • BuckBilly
      The Official Good morning thread!
      By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • Tim Keiper
      2 problems with 2000 Timberwolf 4x4
      By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • Thumpinhard25
      01 bear tracker stutter/ bog, electrical ??
      By Thumpinhard25
      First thanks for any help guys, new to the forums and it's gotten me this far. I bought a 2001 bear tracker 250 for my family to get around the dirt bikes races. It wasn't running right and had a high idle. Previous owner thought it was a carb problem, so he ordered a new Zoom carb and new intake boot, but it still had the same high idle. ( I believe he had the throttle cable adjusted wrong, because it idled fine when I put it back together) So I tore down and cleaned the stock carb, and it started up and idled fine, but needed to have the choke 1/2 out to run.  I swapped to the new zoom carb and had the same issue. Choke half out bike ran ok. I played with the needle and the pilot screw with no change. ( bike did seem to be running rich though, but didn't get better when I tightened pilot screw or raised meddle) I Took it to the races and once I started bouncing around in the cattle fields the quad started cutting out real bad. It would barely run.  Sometimes it would run with choke off, sometimes choke 1/2, sometime choke full. I cleaned carb again, checked float level, and boots, no change still wouldn't run. Then suddenly it started running ok again.  This makes me believe it's an electrical issue rather then carb. I know there's no air leak, it's been checked, both carbs are clean( I've swapped them out a couple times, it starts up immediately and usually idles fine. But then bogs down/ or stutters under throttle. I saw the post on the guy who disconnected his rectifier and reconnected and suddenly it started working again, which lead me to believe it may be electrical and not carb.  So any advice on what I should check? Any way to test the CDI or rectifier?  Once again, I appreciate your help.  


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...