Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

dgk_mike

1994 Yamaha Timberwolf 250 2x4 gear problem

Recommended Posts

It will go into neutral, 1st, 2nd, and reverse but nothing after 2nd gear. The shifter moves freely going up completely nothing but when you shift down it works. I’m not sure if it’s tranny issue worth messing with or if I should just buy a new one.  Overall besides that the thing runs like new.

D8BC711F-6535-4B86-B8C9-2B82E3128BAB.jpeg

  • Like 1

Share this post


Link to post
Share on other sites


Wow its in pretty good shape for a 94. That was a simple atv. Just look under the front end, theres nothing to it.  Simple and effective design.   
Same thing goes for the engine. If your mechanically inclined you should be able to pull the motor and split it open.  

BUT before all that have you drained the oil and looked for pieces of gear that may have broke off In the drain pan? 
How does the shifter feel when you shift up?

Do some simple checking first before anything crazy and make sure of what's going on. 

But this all depends on how handy you are.  
 



 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Halley
      Could anyone take a look at the picture and let me know if I’m needing to replace the actual throttle cable or the throttle handle ? Its for a can am 2018 outlander XMR 1000. It’s in limp home mode and throwing code P1619


    • By richard fischer
      I have a new 2020 cforce 600 touring and read how smooth the shifting was on it. Mine however, sticks in gear quite often and only after moving the bike around does it finally shift. I use the brakes before shifting as it says but that doesn't seem to affect it either way. Anyone have this issue? Is there an adjustment on the linkage perhaps? Any suggestions are appreciated. The machine is new with about 10 miles on it.
    • By Muskyjim
      I recently purchased a 99 big bear 350 2x4 that was sitting for a while got it running and went to take it for a ride after about 10 minutes into the ride it stalled and wouldn't let me shift down into neutral tried rocking it back and forth but will not go into neutral...can anyone point me in the right direction on where to start?
    • By Gsk1500
      My byou finally got running after I rebuilt the carb. I took it for a trail ride, and finished by riding her pretty hard up a dirt hill. At the peak of the hill it dropped out of gear, and had to be pushed home. It will still start, and idle. When I apply throttle it revs really high, and no matter what gear it is put into, it will rev high and take a few moments after i release the throttle to wine down.

      I have pulled the clutches out, and it does appear the centrifugal clutch is worn. I took the dremel to it, and tried to get some relief lines back in there.

      Before I reassemble and test, does anyone know if this is even a clutch issue? or possibly transmission/case related.
      also can I make a gasket out of cardboard and Indian head just to test after  cutting grooves in centrifugal clutch?
    • By Michael Kastanis
      Hey I have a Kawasaki 300 boyu and it die in 5 gear and can’t get in Neutral try rocking it and moved it back and forth but nothing can same one here help me pls
  • Similar Tagged Content

    • By emoyer105
      I have a Yamaha Timberwolf 250 2x4 that I purchased a while ago as a project. I fixed it up to where everything was working great in my opinion, however when I showed it to a potential buyer he complained about a vibration from the rear drive shaft. (Which I ridiculous seeing as he tried to wheelie it before that) Anyways I took the rear diff apart and found most of the seals and bearings where bad. So I bought a kit off of amazon only to find that it doesn’t have all of the bearings and seals. After finding that I decided to try to find a used good condition replacement but they’re all to expensive for me so is there a better alternative for me, or can someone point me in the right direction to get the rest of the parts?

    • By KINGSIZE
      Howdy,
       
      I was given a 2008 Yamaha Timberwolf by my in laws a few weeks back. Of course my FIL said it hasn’t run in 8 years but all it needs is gas and oil!
       
      That hasn’t been the case...so far I’ve replaced the spark plug, changed air filter, replaced battery, replaced fuel and oil filters, fresh oil and gas. I tried starting her up and no luck, it turns over but won’t get going.
       
      Now I’ve moved on to cleaning the carburetor which I’ve heard is a common problem area. I can’t figure out how to remove the bowl at the bottom, any suggestions? I removed the four screws that I thought were holding it in place but the bowl won’t budge
       
      Thanks and looking forward to getting her running!
      Some photos of what I’ve got going on , this has taken over the garage




    • By Sharon van den Berg
      We bought an old atv from friends to bum around on the farm with. VIN number is rusted off. Is there a way to determine the year model from the engine number? We only need the info to buy parts. Please help


    • By Todd Barrett
      Hi all 
      I'm finding it rather difficult to find 10"x6" front rims. My question is will 12"x7" fit and will there be enough clarence when on full lock? 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...