Quantcast
Jump to content

92 Yamaha Timberwolf Ball joints

stymy68

By stymy68
in Yamaha ATV Forum

 Share

Recommended Posts

stymy68 Apprentice

stymy68

Posted
Posted

Hello All,

I have multiple Yamaha Timberwolfs, and I'm rebuilding a 92. I would like to replace the Ball Joints on the control arms. Does anyone know where I can purchase them? I don't want to purchase entire control arm. Ebay only has upper ball joints (Funny I don't see Upper Ball Joints, I have struts) and Cheap Cycle Parts, Partzilla and others don't even show the part number for the lower ball joint. There has to be something out there, these are just pressed in ball joints with castle nut and cotter pin.

Please help cross reference. I have another Timberwolf I want to rebuild.

MarkinAR Experienced

MarkinAR

Posted
Posted

You can't find them because they are not serviceable. You are supposed to replace the whole lower A arm. The issue there being that I'd bet you can't get OEM A arms anymore. Best bet is what the 400ex guys do and take some measurements and find something close. Then you have to struggle the OEM ball joints out and press in something close. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • noticon75
      Anyone ride in Kansas
      By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • cfherrman
      1988 Yamaha 350 Big bear No spark
      By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • quadnut20
      Up above Empire Colorado !! The jeeps like this area with all the rock trails
      By quadnut20
    • Maxg_57
      Anyone there?
      By Maxg_57
      Is anyone still active on this club
    • quadmaniac
      What's with all the UFO stuff lately?
      By quadmaniac
      So here's a topic for anything goes forum and to get a way from the china virus stuff...lol. Has anyone been noticing the small drips of news about ufos and the government confirming? President Obama has an interesting late night segment. How warm and fuzzy do you feel when an ex-gov official confirms objects in the sky they can't explain...
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...