Quantcast
Jump to content

Recommended Posts

Posted

I know some Arkansas Riders, I was going to tell them about it. I looked it up online I see it has a dealership Skills Competition. Looks like fun. Do they allow all Brands or just the Brands they sell ? I hope you can post the results or Video is always real good also.

Posted

Any make or model. I will be riding in the Sport Class. DrtyGrl will be in the UTV class. We just bought a helmet cam that can also be mounted onto the Rhino plus we will have a couple of photographers.

  • 2 weeks later...
Posted

So, we had our comp today. I forgot to put on my helmet cam so no video. DrtyGrl did AWSOME in the UTV class. She took second. I did not have that kind of luck, I thought I could save alot of time and just jump over a log section. I couldn't! I ended up going over the bars after burying the front end into the last log. I got back up, continued riding. Needless to say I was pissed and started riding stupid. Even after my crash I had about a 10 second lead on everyone after the first lap. Second lap, I tried to jump the logs again and that was the end of my race. I think I pulled my groin. I've been pissing and moaning the whole day since.

We got some free gear. DrtyGrl got a trophy.

These are a couple of shots from today.

IMG_0133-1.jpg

IMG_0049.jpg

IMG_0063.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By DaveswMN
      Pulled my '86 Moto4 out of shed where it sat for 20 years. I knew it smoked. checked it over a little put in gas and it fired right up!! 
      Drove about 100 yards, ran about half throttle wouldn't idle.  Put on somenew parts, jug/piston and rings, carb and valve seals.
      'went together ok, tuned it over by hand about 6 revs whick went well. Hit the starter it fired for about 6 revs and quit. tried it again fired once and then th sound of something slipping like maybe chain slipping over spoket.
      Took cover off to watch cam sproket, hit starter again, heard same noise and the cam sproket was not turning but jumping a bit. Chain was still tight. You will probably tell me I need to split the lower case but hoping there mightbe something else.
      I don't fully understand the chain tightener, the plunger only moves about 1/4 inch, should it move much more than that when off the motor and compressing it by hand?
      Thanks for any thoughts.
    • By 1998Zuki250
      Anyone here around Fort Drum, NY?
    • By anthonyd256
      I have a 99 Yamaha bear tracker and I have converted the front brakes from drum to disc fairly easy but I cant figure out how to convert the rear with out hacking apart the rear arm. tried to use parts from a wolverine since the rear arms look similar but the caliper mount didn't line up on the bear tracker axle. Can anyone give me any clues or has anyone successfully converted the bear tracker rear brakes. I would even purchase a conversion kit if there is one. Any help on this would be greatly appreciated.
    • By Ajmboy
      If you live in New York, Come and join my group here on quadcrazy! Go to http://www.quadcrazy.com/groups/?id=1
    • By dvs1961
      Just bought a new hisun ,been shopping for a year or more for a sxs   best bang for the buck...Are there any lift kits out there for a 2022 Hisun 750 sector ? links thanks
       
×
×
  • Create New...