Quantcast
Jump to content

Recommended Posts

  • 1 month later...
Posted

I bought one at nearly same date as you too!  Have exact same questions. I feel almost as if im answering my own question here!  I did find out alot of info in past 2 months and can share. Parts are the biggest issue. Look up TGB Blade 550. Its the same atv as Onslaught. Treat yours as this atv. Textron bought out BAD BOY shortly after the introduced the Onslaught. This BAD BOY and TGB (The Golden Bee) is like GMC and Chevrolet. 

 

Sorry. “Taiwan Golden Bee”

heres a link to all parts with diagram

https://www.oemmotorparts.com/oem4.asp?M=China scooter&T=TGB&Y=BLADE 500 R&L=TGB_BLADE 500 R

  • 1 year later...
  • 2 years later...
Posted

I am looking for parts for the 2016 Bad Boy Onslaught 550 EFI 4x4 .. can you point me in the right direction or site to buy parts for this machine ... mainly right now I need the upper steering bushing ...  any help would be greatly appreciated Thank you 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
×
×
  • Create New...