Quantcast
Jump to content

Recommended Posts

Posted

Yeah I looked it up Ajm. Not something we get here.

I don't think you are going to get a manufacturers wiring diagram Jerry, and there are no generic wiring diagrams for something like that switch, or bike. You could take the switch apart and you should be able to see where the wires go, check which wire/pin goes to which switch and when they are connected or isolated from one other, then pull your old switch apart(if you have one), and do the same with it. If you don't have the old switch you will have to try and figure which wire on the bike goes to the power for the headlights and to the headlights, which wire goes to the starter, and which wires kill the ignition and whether the kill function is by shorting two pins/wires or by disconnection them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Arizona
      Just recently bought a dead 06 Eiger, Can someone post or send me a wiring diagram for it:? 
      Need to check all wires, no power in most places, Cant seem to read the ones from online manual,
      too blury and cant tell wire color. Just too small. Thanks Az
    • By Louznmemind
      I know this is a stupid question but here I am.. I'm wanting to have the ability to disable my taillight/brake light on my '96 Polaris Xpress at will, it comes on with the key and there are times I don't want it to illuminate. I have basic wiring knowledge and I'd like to put a toggle switch to disable it. I'm not sure of the wiring setup on this thing, can I just use a toggle switch on the ground wire to kill it when I choose? Can someone clarify which wire I need to work with and the easiest way? Excuse my ignorance yall.
    • By Atomusthenes
      This topic is being opened to discuss the feasibility of forced induction on small engines.
    • By Martin82
      Hello to all, could somebody help me to get the electric diagrams for Polaris Sawtooth 200 , i have issue with missing spark , and also with turn signal, 
       
      I need to verify whole wire harness wiress and connectors , and weldings , and massa connections , but i need the electric wire diagram for it.
       
      Thanks for your support.
      M
    • By umax33
      can someone tell me which side the neutral and reverse switch are on a 1986 honda trx 200 The service manual does not say which side, i got the lites pulled out and looked at them and i think the switches are bad. i just don't know which side they are on , the photo in the book just shows how it looks after a cover is off and not which side its on.i would just like to know so i don't have to take stuff off that i don't have to.  thanks for any info on this.......
×
×
  • Create New...