Quantcast
Jump to content

Recommended Posts

  • Admin changed the title to Idle issue on a 1988 Suzuki Quadrunner 250 lt
Posted

Well.. I'd say you probably disturbed something when you were working on it.. That's the most likely..haha..

Was the filter really dirty, could it be running correctly now(and high because someone had wound the idle up to compensate for poor running)? Have you tried slowing the idle ?

Could you have routed/pulled the throttle cable out so it's sticking where it fits into the carb, or perhaps you've knocked a vacuum hose off, or the choke isn't returned right in because the cable is snagged somewhere ?

Are you are sure it was the fuel line and filter you changed(some of those have a restrictive/one way valve that looks a bit like a fuel filter, but it's on a vacuum hose to the tap.., 

  • Like 2
Posted

Try the idle adjusting screw looks like a cog on mine or maybe on the end of an extension cable. I would try that before pulling anything else apart.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Maxg_57
      Is anyone still active on this club
    • By Mikey509
      Hi everyone, first and foremost, I want to thank everyone for all the help I've received. I am so glad I found this community. I also wanna apologize if I'm spamming the forum, I come up with questions as I go, I guess lol. So when I got my Recon, the air box was missing the lid, held together by zip ties, and the filter was ripped and nasty. I have since ordered a new air box assembly. It comes with everything: the box,  lid, and filter ( the insert and the foam), and all the hardware necessary. This is the first time I've seen a metal filter inside a foam filter lol. However, my question is, I have read that you have to oil these filters? Every time I read it, it was always skimmed over, and I could not remember where I had read it. Is there a certain oil needed for this? Is the filter washable and reusable? Do I just stick the filter in oil, lol? Sorry if it sounds like a dumb question. Thanks in advance, y'all!
×
×
  • Create New...