1994 Quadrunner LT-F160 rear axle seized up.

[deke]

The bearings went bad but I don't know how to remove the rear axle to replace them.  Any advice would be appreciated.

[Mech]

I'd say take that big nut off and the axle will slide to the right..

Or there's another big nut on the other side under the brake drum, then it slides left..

[Mech]

At the top of the page there's a "more", button, click on that and choose atv manuals, then in a new page, over on the right and down a bit choose the make, then you might find a service manual.

[deke]

Thanks.  I tried that already but you can't download anything until you've made 10 posts.

1 hour ago, Mech said:

I'd say take that big nut off and the axle will slide to the right..

Or there's another big nut on the other side under the brake drum, then it slides left..

Thanks.  That's what I have been thinking.  The bracket for the sprocket won't move so I'm thinking I will have to pull the axle out to the left.

[Mech]

Keep posting..

This might help in the meantime..

https://www.mickhone.com.au/partFinder/fiche/suzuki/1994/lt-f160/rear-wheel#next

[deke]

1 hour ago, Mech said:

I'd say take that big nut off and the axle will slide to the right..

Or there's another big nut on the other side under the brake drum, then it slides left..

Thanks.  That's what I have been thinking.  The bracket for the sprocket won't move so I'm thinking I will have to pull the axle out to the left.

Thanks for the diagram.  I will save that.

[Mech]

I see you've made ten posts already...  I thought that was enough..

[deke]

Yeah.  I just downloaded it.  I tried an hour ago but it didn't work then.  Thanks for the tips.

[Mech]

Good stuff.. Have fun.