-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Gwbarm
Still working on the 2000 Big Bear with a no spark issue. A lot of this has been covered in an older thread, but I will summarize.
Bought it with the previous owner telling me it needed a new wiring harness, but the wiring harness was in tact and seemed to be fine, except starter solenoid and coil was missing, also the engine was stuck, and no spark plug. Got the engine free and rotating, checked compression, it was 130, not great, but good enough to run. Hooked up a battery, nothing , went through all the wiring and found starter cutout relay bad, replaced that, now I have it rotating with starter. Pulled the plug checked, no spark. Checked start/stop switch, working like it should, reverse relay was bad ,replaced that. Checked continuity from coil to CDI, good, checked pickup coil resistance, within specs, checked anti kickback coil resistance, within specs. What am I missing.
-
By Atvguy0901
Thank for the add on quad crazy. I am new here and need some help with my atv. It’s a older Yamaha Timberwolf 250 that I purchased second hand from an person. I got it home ans started to look into it. He stated it needed a cdi box so I ordered one for it and a battery as well also a key switch cause it did not come with one. I put all the parts on it and when I hit the start button it just clicks and noting else. Thank you any help is appreciated.
-
By Yourmanyoshi
I have a kawasaki klf 300b 1987 and when i got it originally from a friend it was sitting for like 10 years and of course it didn't run so i went through the steps of fixing it. Had good compression and clean carb but i wasnt getting any spark. I went through the steps of fixing that and turns out the cdi box was bad, so i replaced that and got spark so i started her up and she was a little scared at first but slowly broke in and idled perfectly fine. But everytime i gave it any gas it would just bog out completely so i had it idling and sprayed starter fluid into the intake to see if it would rev up, but it did the opposite and died out. I think it might be something to do with the spark since after that i took it out and it was wet. Im guessing its not sparking at higher rpms but i have no idea how to fix that since ive never had that issue before, keep in mind ive cleaned the carb maybe 5 different times with a supersonic cleaner and put needles through all the wholes. Someone please help me out with this old *** atv
-
By Ajmboy
View File 1986-2006 Kawasaki Bayou 300 service manual
This service manual is for a 1986-2006 Kawasaki Bayou 300.
Adding to downloads library.
Submitter Ajmboy Submitted 05/11/2018 Category Kawasaki ATV
-
By mga
Is there any special way to align the front end so that it drives straight?
It's not bad, but it still could use an adjustment. I'm suspecting the tie rod was improperly adjusted to compensate for the bent lower "A" arm which i replaced.
-
-
-
Similar Tagged Content
-
- 0 comments
- 489 views
-
- 0 replies
- 377 views
-
- 0 replies
- 685 views
-
- 0 comments
- 844 views
-
- 3 replies
- 2,332 views
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.