Quantcast
Jump to content


Where do you Buy Parts


Hoyt1500

Recommended Posts

I'm rebuilding a 2004 Suzuki LT80 and am wondering where everyone is buying parts for their carbs, clutch, and transmission. Has anyone had success with Amazon parts or should I stick to OEM parts that can be found on partzilla or suzukipartshouse.com. I found one old thread where people talked about only buying OEM for top end but other locations should work. 

 

Link to comment
Share on other sites

Personally I research and read reviews. Plus it depends on what you want the end product to be. A full restoration is different from a functional usable machine. General fasteners- hardware store. Carburetor, rebuild what I have or search ebay for an oem that hits my price point. Facebook market place can be good for bodywork. Or maybe a complete parts machine. Tires for the machine I'm building now are going to be from Kenda, there are some on Amazon that look really good at almost half the price. But reading reviews outside of Amazon I'm thinking they may not be a.good investment. I've a tight budget for the equipment on the farm here and am always looking to save money. I try to keep the mechanics of things in the best shape I can but don't worry what they look like. 

Link to comment
Share on other sites

I think for the 3 you listed, OEM would be best, if its an OEM carb, if its aftermarket you could probably buy a new aftermarket carb as cheap as an OEM kit, but if its OEM carb, I would stick with OEM kit. The clutch I have heard the aftermarket clutch kits don't work very well, maybe Ebay, I don't deal with eBay much except for umobtanium parts, transmission parts can get expensive OEM, you might find a good used one at Ebay, I have done that, don't know what all you need.  I Use Motorsport.com, and rockymountainatvmc.com for OEM parts. I actually have an aftermarket carb on my suzuki only because it had already been replaced with aftermarket and the OEM one was 450.00. Which brings me to my next point, as Jim said, if you are on a tight budget aftermarket parts will probably be fine, but look at them closely and read everything to make sure they fit your machine, I have done that and still some don't fit and some don't work. 

Link to comment
Share on other sites

Thanks Jim and Gwbarm. Your input backed up my worries about buying aftermarket clutches from amazon or ebay. I typically look at reviewers comments about a product if they're available before buying. It does seem that some of the aftermarket parts on Amazon have free returns, which can be a good thing if the part does not match up. I think I'll stick with OEM for the clutch and transmission if possible. Thanks!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Gwbarm
      I Ran across this video today comparing an aftermarket to OEM Carb on Suzuki Vinson, thought it might generate some interest, it is quite long but informative.
       
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
×
×
  • Create New...