-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By geezer99
My Axis 500 has a solid spool rear end. That gives great traction for hills and pulling, but it tears up a wet lawn on sharp corners.
I wonder if a true limited slip differential or a lockable differential is available in the after market? I googled with no results.
Thanks, tom
-
By HondaRubi2022
Hello,
I have a 2022 Honda Rubicon and I have an issue where it won’t start, when I turn the key for power nothing lights up and it won’t start but the lights will turn on with the light switch, I’ve checked all fuses and they’re good, I don’t have a wiring schematic I’m not sure where to start, I checked the ignition fuse when I turn the key on and there’s no voltage there, I used a jumper wire from the batter to the top of the ignition fuse and then it works fine and starts fine but as soon as I turn the quad/key off it won’t start again until I jump the ignition fuse with battery power, just wondering if anyone could give me some tips where to go with this or if anyone has had the same issue, thank you.
-
By unirambler
My son and I were "gifted" a KQ300 that doesn't run. I am beginning to try to figure out what is happening - and what is missing/disconnected. I connected a battery and found that it does have spark. I was able to get it to fire briefly when I sprayed some carb cleaner in to the carb. So, I am assuming that it is just a fuel issue. I'll begin by checking the stopcock and fuel pump and then take the carb off and clean it.
However, I am finding other things that are missing and not sure if they might affect this. I tried to test the voltage regulator/rectifier only to find there isn't one. I know there are a bunch of hoses disconnected and possibly some missing. Also, the air box was removed and all parts of the air filter are missing. The throttle cable is disconnected but I did get the cover that needed to be removed to disconnect it. Do you all see anything else that looks like it is missing from the pictures below?
Is there anything else I should test for it not firing? Thanks for any help. This is my first quad so I am learning as I go.
-
.thumb.png.538ed68bd1a0b25fcc8d85287f5d96e5.png)
By Lafytafy
On my Suzuki, the muffler is very thin and I have tried to weld a patch over the holes but I just melted the metal. my welder is cranked all the way down but still, I have no luck. What do I do?
-
By Atvguy0901
Thank for the add on quad crazy. I am new here and need some help with my atv. It’s a older Yamaha Timberwolf 250 that I purchased second hand from an person. I got it home ans started to look into it. He stated it needed a cdi box so I ordered one for it and a battery as well also a key switch cause it did not come with one. I put all the parts on it and when I hit the start button it just clicks and noting else. Thank you any help is appreciated.
-
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.