Quantcast
Jump to content


Moto4 350 reverse lever problems


Recommended Posts

I have a 1988 Moto4 350 YFM350ER and I have been searching high and low for a reverse lever assembly for this ATV and have not been able to have any luck locating one for probably the past 6 months. So my question is, is there another model/Year reverse lever that would be compatible for the Moto4 350 that might be easier to find or that an after market one that I could throw on there? 

Any help on pointing me in a good direction would be greatly appreciated. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Flash_fella
      I had a sudden loss of spark in my 1988 Suzuki LT300E quadrunner and we tried a new plug but still no spark. Then we checked the boot and there was no issues with it. I then took off the coil as I was going to get a resistance reading with a multimeter however I cannot find anywhere what the readings should be. The coil is a Mitsubishi F6T 411. Any help would be appreciated. 
    • By oxidized_black
      Yamaha ATV manuals are located in the downloads section here at QUADCRAZY.
      Please visit the downloads section at https://www.quadcrazy.com/files/
      Get 15% at emanualsonline.com with coupon code EMOAFF
      Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
      Clymer ATV Manual - Yamaha Raptor 700R
       
    • By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • By Ajmboy
      What's the best kids atv out there? I've seen everything from the ones released by the major manufacturers to all those knock offs. Kawasaki has a KFX 50 that is pretty nice for under $1800...
       
×
×
  • Create New...