Quantcast
Jump to content

2019 LTA-500

Phil

By Phil
in Suzuki ATV Forum

 Share

Recommended Posts

Phil Apprentice

Phil

Posted
Posted

I have a 2019 LTA-500 that needs a rebuild. The head assy and cover and cam is trashed. It seems like lack of oil feed to top end. Piston and cylinder is good. My main reason for posting is where is the cheapest place to buy parts?

I'm in Australia but I have bought some parts before from Partzilla. I did find a reconditioned head assy on ebay from seller ATVcylinders, but still need a few things like cam oil pump, gaskets etc. I'm still looking for a workshop manual for this bike. Some photos of the damaged cam and head.

20230618_113513.jpg

20230618_113555.jpg

20230618_113700.jpg

Gwbarm Grand Master

Gwbarm

Posted
Posted

Looks bad I think you are right about no oil, hate to see that happen to one so new. I use rockymountainatvmc.com or motorsport.com  have used partzilla no problems, the others are usually cheaper. 

Mech Grand Master

Mech

Posted
Posted

A lot of bikes have a restrictor in the oilway going to the head, They can get a blockage at that restriction. The restrictor is generally down in a side case or main case in an oil gallery.  You should refer to the manual's oil circuit diagram and check it I reckon.

  • 2 weeks later...
thelostjs Rookie

thelostjs

Posted
Posted

wow that cam is so ugly. did it make much noise? i looked up heads on US ebay and found one for a 2016 its 79 dollars and looks like it needs a valve. the pics are pretty blurry but here is the sellers name. you may want to inquire further. nbgmotorsports   

 

Picture 1 of 9Picture 2 of 9Picture 3 of 9Picture 4 of 9Picture 5 of 9Picture 6 of 9Picture 7 of 9Picture 8 of 9Picture 9 of 9

Picture 3 of 9

2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 1 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 2 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 3 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 4 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 5 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 6 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 7 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 8 of 9
2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795 - Picture 9 of 9
 
 

2016 SUZUKI KING QUAD 500 LTA500X 4X4 AXI CYLINDER HEAD CORE #15795

image.jpeg.c6d887835431dff63fd3000b9f279440.jpeg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Randel1
      Oxidized or faded plastic body parts
      By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • BuckBilly
      The Official Good morning thread!
      By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • Atomusthenes
      Forced induction single piston 4 stroke engines
      By Atomusthenes
      This topic is being opened to discuss the feasibility of forced induction on small engines.
    • Gwbarm
      Heavy Duty ATV Cover
      By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • BuckBilly
      Where you like to ride and what riding does for you?
      By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...