Quantcast
Jump to content

Recommended Posts

Posted

Hi Everyone!

Recently, I could no longer start my Arctic Cat using the green starter button.
Initially, the response was intermittant (sometimes it would start and other times in wouldn't).
Finally, I get no response or sound by pressing the green button.

I'm trying desperately to trace the wires from the green button but can't seem to follow.
I took the button apart and cleaned the contacts but no difference (yet my instruments indicate contacts are OK).

I inserted an image to show the wiring colors going into the green switch.
I'm still able to start the machine by using a long screwdriver to short the starter.

I'm hoping someone can help me find a possible break in the wiring or any other cause.

Many thanks in advance to anyone who can help me!

Jerry

 

 

 

image.jpeg

Posted

Check to make sure you are getting voltage to the starter, if you touch the two posts on the soloenoid together with a screwdriver the starter shouuld rotate. If it doesnt and you have voltage it might be a starter issue, try tapping the starter lightly with a hammer and see if it turns, or makes any sounds. If you went to the starter directly you completely bypassed the switch.

Posted

Sorry i misread your post, i thought it wasnt starting by touching the post on the soloenoid, you should have a starter cutout relay that can go bad, it should be a black box close to your fuse box, and check fuses also, there is one attached to the soloenoid. You can trace the wires and check for continuity on the wires, orange white and yellow green wires to check for a break.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • By tepin
      Здравствуйте, нужна помощь по ремонту багги Arctic Cat 700 EFI, пропала искра, датчик коленвала импульс есть, Самодиагностика показывает две ошибки AC99,AC96. все провода проверил на целостность, все датчики блоком определяются, не включается топливный насос. Провода от ECU до реле насоса и от реле до насоса исправны. Поставил подменный ECU, ничего не изменилось.   

×
×
  • Create New...