Quantcast
Jump to content


December QOTM Entry


DeadAim

Recommended Posts

woodsinstalled2004dy1.jpg

woodsinstalled20073lv.jpg

Action shot!!

picture0391ku.jpg

-Body-

Plastic-Yellow Fullbore

Handguards-Yellow Powermadd

Graphics-Nasus

Seat Cover-Stock Modified

Numbers-n/a

Bar Pad-Joker

Fuel Tank-stock

-Chassis/Control/Suspension-

Frame-Stock

Steering Stem-Stock

Hubs-Stock

Handle Bars-Pro taper

Throttle-Moose

Clutch Lever/Perch-Fly

Grips-Oury

Nerfs-Ac

Bumper-Stock

Grab Bar-Stock

A Arms-Stock

Front Shocks-Works spring kit TPS/zps

Rear Shock-Works spring kit Zps

Swingarm-Klein Racing +2

Axel Carrier-Stock

Axle-Stock

Brake Lines-Stock

Axel Locknut-Stock

Rotors F/R-n/a- stock

Rims F/R-Stock dirt/ sand douglas 8x6 .125

Tires F/R-F- stock R- turf tamers/sand 22*11*8 8 paddle haulers

Stabilizer-n/a

-Engine and Drive-

Cylinder-Athena

Head-Hp porting,Hot cams stage 3,Kibblewhite spring&valves

Bore-97mm, 14:1 venom

Stroke-+3

Displacement-501cc

Carburetor-44 lectron

Air Box-n/a

Air Filter- Ron wood

Case Vent filter-K/N

Pipe or Silencer- Ron wood

Clutch/Plates- EBC

Gearing F/R-13-39

CDI-Stock

Kill Switch-honda dirt bike

Cooling system-In-line aluminum cooler

-Other- please list.

Cold fusion nitrous 20 hp shot

Lazer lights

piaa h6m bulbs

lots of powder coating

See thru clear and billet gas cap

Modquad park brake block off

Thats is most I can think of know!!

Link to comment
Share on other sites

Body-

Plastic-Blue stock

Handguards-NA

Graphics-NA

Seat Cover-Stock

Numbers-n/a

Bar Pad-Fly racing

Fuel Tank-stock

-Chassis/Control/Suspension-

Frame-Stock

Steering Stem-Stock

Hubs-Stock

Handle Bars-Fly racing

Throttle-stock

Clutch Lever/Perch-stock

Grips-Fly racing

Nerfs-na

Bumper-Stock

Grab Bar-Stock

A Arms-Stock

Front Shocks-stock

Rear Shock-stock

Swingarm-stock

Axel Carrier-Stock

Axle-Stock

Brake Lines-Stock

Axel Locknut-Stock

Rotors F/R-n/a- stock

Rims F/R-Hole shots

Tires F/R-F- stock R- sand shark 22*11*8 8 paddle haulers

Stabilizer-n/a

-Engine and Drive-

Cylinder-stock

Head-stock

Bore-stock

Stroke-stock

Displacement-660cc

Carburetor-stock

Air Box-open air box

Air Filter- K&N

Case Vent filter-K/N

Pipe or Silencer- MBRP

Clutch/Plates- stock

Gearing F/R-13/44

CDI-Stock

Kill Switch-stock

Cooling system-stock

But in 2weeks I'm getting Abla racing +2 arms. LSR +4 axle, Hiper rims F/R and LSR +2 swingarm....but what shocks should i get can some one help me

j Q 006.jpg

j Q 007.jpg

57d7732dc3137_jQ006.jpg.a7a4395e82c348afe48d5b9e38e7efb4.jpg

57d7732dc6bcc_jQ007.jpg.a7bbe2018f411c596eec73d4e0948750.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By oxidized_black
      Yamaha ATV manuals are located in the downloads section here at QUADCRAZY.
      Please visit the downloads section at https://www.quadcrazy.com/files/
      Get 15% at emanualsonline.com with coupon code EMOAFF
      Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
      Clymer ATV Manual - Yamaha Raptor 700R
       
    • By Need-help-with-quads
      So I have an 89 Yamaha moto 4 250cc and when I ride it, itll get hot after like 10-15 mins and then will just die and turn off.
      It's has new carb rebuild, new air filter, new battery, new spark plug so I don't think it's a crack in the spark plug
      Can anyone help me?
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





×
×
  • Create New...