Quantcast
Jump to content

New Teryx Winshield from HunterWorks.com

utvboard
 Share

Recommended Posts

utvboard Proficient

utvboard

Posted
Posted

teryxwindshield_ezr2.jpg New unbreakable and uncrackable material, same great coating.

I will tell you why you should consider it.

Reason 1:

We found a company that makes windshields for NASCAR and they have a proprietary chemical they flow onto Acrylic or Polycarbonate and then bake it on and the result is the MOST scratch resistant windshield next to glass which is very break prone.

Any other windshield out there requires special cleaners and special rags because they scratch so easy. You can use gas and steel wool on ours to clean it, it doesn't hurt it.

As a matter of fact we took a piece of steel wool and ran it under a windshield wiper on the windshield for three straight days and no scratches. Try that with the others!!

People ask, "Can you scratch it?", yes you can with a screwdriver or something but not with dirt on a rag or cloth like the others out there.

Reason 2:

With any other windshield including the half windshields dust is a big problem because of the vacuum created behind the windshield as you travel. Ours has a vent all the way across you can open on warmer days and allow the air to flow thru upsetting the vacuum therefore cutting down on dust.

Reason 3:

All windshields including half windshields are hot in the summer, on ours just open the vent up by loosening the four knobs on the vent and slide it open to let the air flow thru all the while protecting your face

Reason 4:

Our windshield is fully trailerable with no worry about bowing the windshield since we have the two pieces of aluminum angle to give it support.

Reason 5:

Our windshield is by far the clearest windshield available next to glass, see the photo below taken from inside the cab.

Reason 6:

Now with new material it won't break or crack, see our video.

Windshield Test Video

Price: $363.95

More details: http://www.hunterworks.com/inc/sdetail/30695

Website: http://www.hunterworks.com/

UTV Industry News

More...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • Callaway
      Has anyone found aftermarket CDI for Big Bear 400?
      By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
    • 97kingquad
      Suzuki king quad 300 idles great but Boggs when you apply throttle
      By 97kingquad
      Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years. 
      He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year. 
      I bought it for 800 bucks and got it running that night and it ran great for a few days 
      But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
      So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing) 
      Now today I have it running slightly better, but it is still like 20% 
      I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle 
    • TravisCr
      NorthEastern Washington great riding areas?
      By TravisCr
      I don't know if I shouldn't have posted but I this is my second post on this (other was in regionals Forum)  The family has a 2-up 2004 Artic Cat and a 2003 Polaris Sportman and we are looking for fun/easy rides in the Colville, WA area- 70 Miles North of Spokane WA, we have a small trailer we can haul these with but need to find some good areas for beginner.

      Thanks in advance for any suggestions.
    • TravisCr
      Looking for suggestions for great places to ride around Colville,WA?
      By TravisCr
      The family has two quads and have been asking where to ride around here- we are about 70 miles north of spokane and looking for places that are nice to go visit for beginners.
      We have a 2003 Polaris sportsman, and a 2004 Artic Cat 2-up (I forget the size)
       
    • McG75
      New Yamaha Timberwolf Rear Shock Found!
      By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...