You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
picked up a bear tracker cheap, with some issues. it was running away, popping, and had to keep the choke on, etc....took the carb off, cleaned it up, now its running much better. sort of. now is seems as though it is getting way too much air, or not enough fuel. i have the adjustment screw turned out more turns than i like to admit. messing around with things a bit i took the air filter out, and partially blocked the intake with duct tape, which in turn makes it run much better. missing a little punch off the line, but not totally bogging out. any ideas here? i dont claim to be the carb king, but this seems to be the most complex carb i have seen in a while.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.