-
Similar Forum Topics
-
By Jhb12686
Hello I appreciate the welcome into the group. I am beyond frustrated with this desperate search for parts. I have a 2013 XY power sports UTV 300. I had a catastrophic failure in my rear differential which resulted in the destruction of almost everything inside. I have located everything I need to completely redo the rear end. But I cannot find a short side axle shaft with six splines etc. it's an offset differential and one shaft is longer than the other and I need the short one. The tip of it broke off (pic). Any help in getting another shaft for this thing would be GREATLY appreciated. Thanks guys
-
By autocustomizer76
Hey all got a Kawasaki 300 that's seen better days I'm looking to get running. But first, I'm working on a Honda 350 ES and mainly needing where are you all finding quality parts at good prices. Atvs are really hot items around here right now and most of the folks wanting and needing them are not familiar with working on them. I'm looking to find a good resource for information and if it works out well pass this group along to the folks I help to get them in the know how to get the most out of their machines. Thanks in advance.
-
By QuadConfussion
Hey everyone! Just introducing myself and hoping I can get some insight on where to start. I have an older quad, my guess is about an 07. I know it’s a 700 but I’m having some stalling issues with it after it runs for about ten minutes it will die out. It will start right back up and run but after a minute or two it will die again. Any suggestions on where to start checking things?
-
By Frank Angerano
So who's pulling for who in this years Super Bowl?? Im a big fan of Andy Reed and Kansas City (But loyal to my NY Giants) hope he finally gets his ring. He's a great coach but has had a hard time closing the deal! Maybe he gets it done!
Good luck to all the pool people!!! I have 11 boxes and never hit on a Super Bowl box so im not expecting anything good to come again but always hopeful.
Thoughts ????
-
By pokerl0w
To start it off, I'd like to share the bakery display cases I made for my wife. I'm sure ya'll have some impressive stories behind those HF tools, let's see 'em!
I built these bakery display cases for wife on almost 100% HF tools a couple years ago. Only thing I bought from Home Depot was the wood/plywood/stains and 3 sawhorses for my workbench. Router, circsaw, blades for both, sander, sandpaper, gloves, the nails for the nailgun (gun borrowed from dad, have a 5# pancake for air) I had almost zero tools to start.
Some of their cheap "speed" clamps failed, but first time for me using those types of clamps, was expecting them to hold better:
heh my youngest helping my dad glue:
and for fun, here was the finished project (1 of 2, built 2 cases, this is the smaller .. the plastic was from Tap Plastics for the "sneeze guards" and the top case):
back side showing both cases:
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.