Quantcast
Jump to content

new here from Michigan

sumosid

By sumosid
in New Members Area!

 Share

Recommended Posts

sumosid Newbie

sumosid

Posted
Posted

new here just checking it out, i ride anything with a motor. :horse: :usflag: :doa16: :shoot: :cheer2: :censored: :prod: :Chevy_animc: :beatdeadhorse5c: :icon_bsc: :iagreec: :sifonec: :reddevilc:

DrtyGrlKristin Proficient

DrtyGrlKristin

Posted
Posted
new here just checking it out, i ride anything with a motor. :horse: :usflag: :doa16: :shoot: :cheer2: :censored: :prod: :Chevy_animc: :beatdeadhorse5c: :icon_bsc: :iagreec: :sifonec: :reddevilc:

Welcome Welcome!

Anything with a motor? Even like, a blender? :wink:

Sorry that was kinda dumb! Anyway, glad to have you here!!!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • maikytech
      Need help with my 2007 polaris twin motor
      By maikytech
      Has 60 psi and motor recent flooded...what the true compretion
    • BlueBowtie
      Big Bear 350 motor into a timberwolf?
      By BlueBowtie
      Is it possible to put a motor from a big bear 350 into a timberwolf? Reason I ask is that I have a timberwolf with a bit of a rod knock, and I have big bear with a bad rear end and axle with a good motor. So, is it possible?
    • n4cer26
      97 Magnum 425 - Motor locks up with plug in but fine when out??
      By n4cer26
      Just bought a non-running 425 Magnum 6x6. Guy said previous owner had motor rebuilt (3 years ago or so.) It reportedly ran great but recently the electric start began failing and he put a new recoil on it which he broke immediately.
       
      I get it home and put a new recoil on it and the pull is incredibly hard....so much so that I think I'm going to break the new recoil assembly. I also installed a new starter which won't roll it over either.
       
      I'm thinking maybe a hydro-locked situation so I pull the plug and the motor rolls over fine with both pull start and electric start. The cylinder was dry however.
       
      Checked the valve lash and it was right on at .0006".
       
      Checked the compression relief spring on the end of the cam and the spring was strong and keeps the metal piece against the dowel like it should. The cam lobes look good from what I can see.
       
      I have a small camera that I dropped into the cylinder. Could t get a pic of the entire chamber because of the angled engine but there are marks on the center piston and a couple of grooves once side of the piston top. I will include the photo.
       
      Anyway....I'm at a total loss at this point. Not sure how to proceed and diagnose. Would sure appreciate anyone's help who might know what the heck is going on! I was able to get it to turn over about 5 times with electric start with compression tester installed which read 145 lbs. I don't know what else to do!
       
       Reply
       
       
       
       
      Sent from my SM-F926U using Tapatalk
       
       
    • psychodad
      New member just checking in
      By psychodad
      As noted, new member checking in to look around.  Mainly interested in troubleshooting ideas and technical information.  Currently rebuilding a carb for a 2006 400 Big Bear for a friend.  Needing the float height, will post request as soon as I find the proper sub-forum.
    • Hemmp89
      New member checking in
      By Hemmp89
      New guy here from Long Island New York. Just acquired a 2000 klf300. Grew up wrenching on dirt bikes, moved onto Jeeps and cars. Picked up this project as a toy to take to some family owned land in Vermont to tool around on.  Been sitting for years so needs to be gone through but looks clean for it’s age.  Pics to come! 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...