Quantcast
Jump to content

Recommended Posts

Posted

New to ATV's with one year experience with this ATV.

When I use the electric start, there is a rapid clicking at the starter relay assembly. I replaced the starter relay with the same results. No other sounds.

The battery is good and lights work. The ATV will start with the pull cord but it is very hard to pull and is not a good option.

I guess my next option is to pull the starter but would appreciate any other input for my starting problems.

Thanks.

Charles

Posted

Usually a relay clicking indicates insufficient voltage to the starter. Is it the original battery? if so, it's time to buy a new one.

The starter uses more battery than anything else- the lights could work fine but the battery may not have the guts to roll the engine.

try jumping it from a 12 volt battery- if it starts, it's the battery.

It could be a starter, but more likely it's a battery. They usually last 4-5 years.

Posted (edited)

No problem, we are here to help one another, anytime you need anything, we will be here.

When I bought my LTR, my dealer recommended that I put the battery on a trickle charger overnight every month to make sure that every thing stays fully charged. I don't know why that would be necessary if you ride it alot since the alternator keeps the battery charged, but if it sits for long periods, then it is probably a good idea.

Edited by DirtDemon
  • 12 years later...
Posted

Hello, I have a Yamaha Bruin 350 from new about 6 years ago and it has worked perfectly until now.   When I try and electric start, there's a clicking and it doesn't start;   it will start okay with the pull starter but I find that is very difficult option - it's very hard.    I bought a new battery and the problem persisted (so I returned the battery!).   The clicking comes from a small plastic box area near the battery.   Any ideas?   Richard

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Admin
      View File 2016-2026 Polaris Youth ATV 110 EFI service manual
      Download the 2016-2026 Polaris Youth ATV 110 EFI service manual PDF for complete factory repair, maintenance, troubleshooting, and diagnostic procedures. This comprehensive Polaris Youth ATV repair manual covers all major systems including engine service, EFI fuel injection, transmission and drivetrain maintenance, suspension, steering, brakes, electrical troubleshooting, wiring diagrams, torque specifications, and factory maintenance schedules.
      Designed for parents, mechanics, ATV owners, and DIY enthusiasts, this factory-style service manual provides detailed step-by-step instructions and diagrams for maintaining, troubleshooting, repairing, and rebuilding Polaris Youth 110 EFI ATV models.
      Topics covered include:
      Polaris 110 EFI engine repair
      EFI fuel injection diagnostics
      Transmission and drivetrain service
      Suspension and steering maintenance
      Brake system repair
      Electrical troubleshooting and wiring diagrams
      Oil change procedures and maintenance intervals
      Torque specs and factory service data
      Polaris ATV diagnostic procedures
      Starting and performance troubleshooting
      Popular related searches:
      2016 Polaris 110 EFI service manual PDF
      Polaris Youth ATV repair manual
      Polaris 110 EFI wiring diagram
      Polaris 110 EFI troubleshooting
      Polaris Youth ATV maintenance schedule
      Polaris ATV torque specs
      Polaris ATV factory service manual PDF
      This Polaris factory repair manual is ideal for maintaining and repairing Polaris Youth ATV 110 EFI models used for recreational riding, trail riding, beginner ATV training, and family off-road adventures.
      Submitter Admin Submitted 05/28/2026 Category Polaris ATV  
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
×
×
  • Create New...