Quantcast
Jump to content

Recommended Posts

Posted

got a 99 honda trx 300 4x4 it sat for about 2 years in a garage. changed all the essentials. plug, battery, gas. oil/ filter/ air filter and carb. still cant get the damn thing to start. just turn over a few times once i primed the carb with the primer plug and then it dies once the gaas is gone. i checked the gas flow and that dont seem to be a problem either. backfired once while trying to get it started. NEED HELP My local atv shop wants 85 bucks just to look at it

Posted

Take the carb completely apart, clean it. Make sure to get every hole and passage cleaned out including vent lines and adjust make sure the float is adjusted properly. I assume when you checked fuel flow, you checked it by turning the fuel petcock on and watched fuel flow from the tank? If you are getting fuel through the petcock, and the bike runs when you prime the carb, then I would think that you are not getting fuel into the carb. In that case I would suspect that the float is your primary problem, but I would still give the carb a thorough cleaning if you haven't already.

Posted

i replaced the carb and yea got it running checked plug and oil and finally got it started and idling nicely. now when i give it gas it when im in gear it doesnt want to throw full power down like its struggling any suggestons.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...