Quantcast
Jump to content

Recommended Posts

Posted

My father and I were over visiting a friend of ours the other day and I took some pics of some of the projects he is working on. He has developed a fetish for putting blown Hemis in whatever he can get his hands on. He even has a supercharger for his lawn mower.

This is one of his dragsters, it is powered by a blown, alcohol injected, Arias motor, which is essentially an aftermarket big block Chevy with Hemi heads. The motor makes about 2500hp with a 29% overdrive on a Littlefield 14-71 blower running 30lbs of boost. He is planning on stepping up to a 50% overdrive on the blower and getting another 10lbs of boost and a couple hundred more hp. I believe this thing runs somewhere in the 5 second range at around 270mph.

IMG00050-20091017-1848.jpg

IMG00049-20091017-1848.jpg

This is a Hemi Falcon project.

IMG00045-20091017-1807.jpg

This is my favorite one, it is a Ford Econoline pickup with a yet another blown Hemi in a mid engine setup with a shortened Powerglide tranny. The driveline is going to be all of 4 inches long.

IMG00043-20091017-1759.jpg

IMG00042-20091017-1759.jpg

IMG00044-20091017-1805.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • By Asand211
      I've got a 1995 220 Bayou and the electric start does not work.  When I got it the machine was pretty rough but I was told it ran less than a year ago.  The key switch had been cut off and wires  twisted after the key was lost.  I bought a new ignition switch and repaired the wiring and it is working correctly.  It is in neutral and the neutral light is on when the key is turned on but I get nothing when pressing the start button.  I verified there is no voltage going to the starter from the solenoid.  The fuse in the solenoid is good.  Something I found that is odd is that I get positive voltage(12 volts) to the brown, black, and white wires that run into the solenoid when the key is on.  That doesn't make sense to me but I could be wrong.  I would appreciate any help I can get. Thank you in advance.  
    • By TravisCr
      I bought this from a buddy to plow snow up in the North Eastern Washington- its been getting oil in the water and I've been changing the oil often and adding collant as necessary-
      I've taken the stator cover off and I'm looking at the Oil Seal and water pump seal and they look good- Although I've ordered a factory oil Seal I'm looking at putting it in this afternoon-
      I don't have the factory service manual- am I suppose to Add RTV to the Stator cover Gasket? I've seen some folks suggest grease other suggest RTV?

      Any suggestions here- I'm trying to reassemble it tonight- I looked at downloading the manual but need to get up to 10 posts firsts it looks like-

      I appreciate any suggestions- normally I'm a jeep and honda dirt bike guy- but  I got a good deal on the quad and a plow so I went for it
      Its got a bit over 3K and runs pretty good- but I've had her tore apart for 3 weeks to figure out the oil in the coolant issue.
    • By Stoopidbot1
      I would like to take a second to say happy Father's day to all of the dad's out there... :woot:
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
×
×
  • Create New...