Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I cannot get this drum off, I already have another drum and backplate on order because I've ruined this one trying to get it off. Completely rusted to splines. I cant fit any hub or wheel puller known to mankind onto these lug studs to try and pull it off, I'm really running out of ideas.
Hoping someone will be able to help.
I have a 2006 Kawasaki Prairie 700 with twin Keihin Carbs CKVR D32. The Rear Carb is leaking out the side during cranking. it is not the float bowl overflow. It is on the opposite side of the carb from the diaphragm.
I got this bike not running and someone had already messed with it. I took the carbs apart , cleaned and rebuilt. Everything went pretty easy. It looks like it could be missing a small tube between the carbs but I have all of them listed in the service manual installed. See the pic for where it is leaking from...
Any help would be much appreciated.. Thanks.
I tried to turn my Warn Vantage 2000 into neutral to spool out the line and the clutch is very stiff... I got it.
When trying to engage it again, it was also very stiff and I ended up breaking off the thumb tab -- so I guess I will need to buy a new gear end housing for that.
Anyway, is there some maintenance that is needed to keep the clutch turning smoothly or some trick I am missing?
Similar Tagged Content
By Connor Tuftin
I have a 1988 300 Honda FourTrax, All wheel drive.
My brother and I were fixing up this quad. We put a brand new battery and fuses in and it was running fine until we put the quad into reverse. As soon as it was put into reverse all of the electrical cut out and power wasn't making it to the head unit anymore and both of the brand new fuses popped. We figured there might have been a short from the starter or solenoids, but they are all working properly. At this point we don't know where to start looking for where the short could be. I'm just wondering if anybody has had the same issue or knows of similar issues that could cause these electrical shorts?
By Resurgence Small Engine Inc.
Not satisfied with the commercially available versions, Jonathan recently built an ATV spring compressor.
In this video, he demonstrates using it to remove & re-install the spring on an ATV coil-over shock absorber.
Mistake in video - the coil-over shock is not quite a McPherson strut.
If you are inspired to build your own spring compressor, feel welcome to use any ideas from this video.
Thanks for watching! Resurgence Small Engine Inc.
By Robert Ochoa
Don't worry about hauling the ATVs. We have the helmets, goggles, and gloves covered too. Our equipment is well maintained and gassed up ready to go!
We take the work out of your fun!
Book your next adventure now!
#fourwheeler #atvlife #atvriding #atv #4wheeling #fourwheeling #mudding #outdooradventure #atvs #mudlife #powersports #northcarolina #southcarolina #southcarolinalife #offroading #AwesomeATVRentals #yamaha
Gibbs Technologies Ltd, the world’s only High Speed Amphibian (HSA) technology specialist, today unveiled a prototype of the first commercially viable high-speed amphibian Quadbike/All Terrain Vehicle (ATV) - Quadski.
Quadski is the third demonstration of Gibbs’ HSA technology following the successes of the Aquada and the Humdinga. It is capable of travelling up to 50 mph (72 kph) on land and water and makes the transition at the flick of a switch.
Commenting on the launch of the Quadski prototype, Alan Gibbs, the founder of UK based Gibbs Technologies Ltd. said, “Quadski is both exciting and practical with a multitude of uses”.
“I know consumers will love the fun of driving a Quadski on land one minute and then head straight into the sea or river the next. But there is a very serious side to Quadski as well: emergency services and aid workers will be able to reach areas and people no two or four wheel drive vehicle could reach.”
Recently Browsing 0 members
No registered users viewing this page.