Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

mouche

fenders

Recommended Posts

hey im new to the site and got a few questions if anyone can answer them.

i own an 2003 yamaha kodiak 450 auto and am wanting to replace the fenders on it but i am wanting to put black fenders on it. The closest year model i found with black fenders is an 2005 and i was wondering if these fenders would fit and what i would have to do to make them fit? any and all help would be appreciated, thanks.

Share this post


Link to post
Share on other sites


well im not sure myself but there are alot of ppl on here that can probly answer that ? for you I was just stoppin in to welcome you to the site

Share this post


Link to post
Share on other sites

Yes, I belive the 2003 and 2005 are interchangeable. You can use 400 or 450 plastic. I used to own a 2005 Kodiak 450.

* Note to mod, please move to Yamaha forum and rename: 2003 yamaha kodiak 450 fenders.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By YamahaGrizzly
      Our new friend shows us what the brand new 2019 Yamaha grizzly 700 can do in the mud! He already started modding up his grizzly to help tackle the mud like never before! The 2019 yamaha grizzly really impressed me and I love the look of the 14" rims along with the 2" highlifer lift!
      We got a few new sponsorship rolling in this year so make sure you keep a look out for that stuff!
    • By Gerry Davidson
      Can anyone help me , I did the rear brake pads and rotor but cant find the brake fluid reservoir.   The front in rite there but cant find the back . 
    • By chuckufarlie
      I have a 2018 Kodiak 450 EPS that just this past Sunday I ran through a bit of water.
      After the puddle the belt was slipping, so I pulled over and drained the ultramatic housing and the slipping problem went away. This was all in L and everything seemed to work fine. Later when I got on a road, I put it in H, but it still rode like it was in low... i.e. I had to rev it up a lot just to get to 30mph.
      When at home I pulled the ultramatic cover off to inspect, and it looked okay in there. Not much dirt, belt and everything are clean, but when I rev up the engine (with cage in place, of course), the belt doesn't get to the top of the clutch (maxes out about an inch or 1.5" from top of clutch, so maybe it is normal).. I put it back together but same thing... H seems like L still.
      Do you think the clutch needs to be further dissected for cleaning, or could this be an issue with the gear selector?
       
    • By TheFieldJournal
      Hey Guys, 
      I picked up my first ever ATV on friday. It's an 89 Big Bear. It has some cosmetic issues, but seems pretty decent mechanically. I did have trouble getting the idle tuned to the book spec of 1,300 - 1,500 RPM. I took the carb apart and cleaned it out. Somebody must have lost the spring for the pilot screw, as it's no longer in the carb. Also, I have a dual cable carb, I noticed all the IPL's show the single cable carb, but I see others on youtube had dual cable carbs. When I would adjust my idle speed screw, nothing would happen. I bottomed it out and it didn't seem to make much if any difference. When i pulled the carb apart I saw the screw doesn't even touch the linkage, it's too short. Do the two different versions have different length carb screws? I'm wondering if somebody lost the ordinal, replaced it with the IPL number for a single cable carb which is shorter, and gave up on getting the ATV to idle. If you hold the throttle just a bit to get it to the RPM range listed above, it "idles" great. Any ideas? Or any links to the dual cable IPL?
      Have you guys have good luck with the aftermarket intake boots? Or is this a buy once, cry once deal? I'm guessing the OEM units last longer, but there is a huge price difference. If you have had good luck with aftermarket, where did you get it? My current boot doesn't seem to have any air leaks, but it's encased in JB weld... 
      I'm getting a 9th digit check sum error on the ATV when I put the VIN in. Has anybody seen this before on a Yamaha? The VIN  number looks original as well as the paint around it. 
       
      Thanks, 
       
      Scott
       
       
    • By chuckufarlie
      So I rode my 2018 Kodiak 450 through a bit of a puddle and got water in the ultramatic casing... drained the water but the quad still fails to reach top speed so I figured it's time to pull the sheaves and clean them out.
      When I pulled the primary sheave off, this rubber piece fell out that I can't find anywhere on the parts diagram nor where it might have come from. Any ideas?
      Note, it looks worn down on an angle, so wherever it came from it might have been jammed in the sheave and that could have been what was preventing me from reaching higher speeds.
      Any help is appreciated.



  • Similar Tagged Content

    • By Bagpiper22
      Hey...
      I recently picked up a '92 LTF250 for $250. Even came with a snow plow. It was pretty neglected, and missing the left rear fender and battery cover. The time chain had jumped a few teeth, but once I go that set, and set the valves, she started right up. *Fresh oil, fresh gas, and she's good to go, but not so good to look at. *This is just for our weekend place, so I don't need a beauty queen, but i wanted a fender for safety's sake.
      This was how I found her...



      I wasn't about to spend $250 or so for new fenders, so I came up with a homemade version that works damn well. *It helped that it had already been painted black (was red originally).
      The pictures tell the story, but basically I used a garbage can. *We needed a new one anyway, and they're only $20 for a new one at Lowe's or Home Depot. *I created a template with cardboard first, then cut it out. *Some final bending and trimming, a few dozen zip ties, and voila! *Fender! *I even used the top rim of the can as an edge for added stability. *As a bonus, I cut a piece of the leftover can for the battery cover. *You'd think it was original. *Now we're a set to ride. *Thought maybe somebody would enjoy the end result of this crazy idea...







      Scott
    • By Sparrows
      My old rear fender had a large crack on it, whoever had it before me wire tied it, lol i bought a used fender has some scratches on it, im sanding it a bit with i think 800 grit. should i wet sand aswell? whats the best paint for plastic? should i primer?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...