Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
Just looking for a second opinion before I start ordering parts. It looks like from the below tests it must be a failing stator.
Background - quad runs fine but when I use winch it will drain battery, I can then pull start but even after running for 20 mins if I turn it off, battery still dead and does not seem to get charged at all. Voltage at battery after charging using trickle charger is 12.5. Start up and voltage shows 13.1 at idle, if I rev it up voltage drops to 12.5. LED lights also flicker at night even with fully charged battery. Really more annoying than anything and if it is stator I prob will not change until it becomes more of an issue or maybe during next oil change.
Thanks for looking, appreciate any replies!
Stator plug and letters show how I tested.
[ ] A [ ]
Checked resistance on stator (manual says .1 to .7)
A = .7
B = OL
Voltage idle and 3/4 throttle
A = 31/55
B = 15/33
C = 15/32
2001 bayou 220 KLF220A
Need some help putting a new ignition switch on this thing. I'm not finding homes for all the wires. I can hook up the white wire and brown wire, But the switch has a B/W and Solid Yellow wire i can't find a home for, and there aren't any more wires in the vicinity from the harness that match this, except one red wire with a double female end crimped on, and a few B/Y grounds. None of the wiring diagrams i've founder or have been given match.
I'm also wondering if i have the wrong switch? some switches appear to have 4 wires and other just 2, the Brown wire and a White wire.
I'm at a loss here. Thanks.
Similar Tagged Content
Recently Browsing 0 members
- No registered users viewing this page.