Quantcast
Jump to content

2002 Polaris Magnum 500 rmk issues

mech63s

By mech63s
in Polaris ATV Forum

 Share

Recommended Posts

mech63s Newbie

mech63s

Posted
Posted

Does anyone have any links to manuals? I need one. my drive clutch meesed up on me. pretty sure its the EBS part of the drive clutch. I have found the part I need. I need to know how to tear the clutch apart to get to the main shaft. any help would be great!!!!

DirtDemon Veteran

DirtDemon

Posted
Posted

Good luck finding a link, but I would recommend just buying one so you can have the book in hand while you work on the machine. Everyone wants a free link to a PDF download, but nobody wants to spend the $25 or $30 for a Clymer or Chilton, let alone pay $80 for a factory manual. If everybody gets them for free, then there will be no incentive for people to make manuals for us to use. They are well worth the money, so I don't get why people don't want to pay for them. $80 for a factory manual is way better than paying a tech $80-90 per hour to fix your machine using the same exact manual that you can buy yourself. I hope you can find a way to fix your problem that meets your needs, good luck.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • noticon75
      Anyone ride in Kansas
      By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • Maxg_57
      Anyone there?
      By Maxg_57
      Is anyone still active on this club
    • Shorty51
      2006 Arctic Cat Utility transmission drive shaft replacement.
      By Shorty51
      Good morning, I am new to the forum. I'm 75 years old and love getting ATVs back to usable condition. I particularly like the 2006-2009 Arctic Cat 250 Utility. I currently own 6. The 2006 I am working on only has reverse and low gear. The "drive shaft" in the transmission is completely stripped where the high gear would mesh. Has anyone on here replaced the shaft. I'm told I have to split the case. I was hoping that someone on here could let me know how hard it will be. I already have it stripped down to where the shaft coming in from the clutch side is the only thing left. I was hoping I could just remove the driven clutch and drive it out from there. Directions say different. Any help would be greatly appreciated.
    • toe420
      Anyone from BC?
      By toe420
      Anyone here from BC? Where do you ride? 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...