Quantcast
Jump to content

Recommended Posts

Posted

I just got a 2001 ds650, has a Ron woods cdi box, pro circuit t4 exhaust, k&n filter, a few other things , anyway it ran perfectly for me tons of power no weird sounds looks brand new, I rode it around in the woods today for about 3 hours fine no problems at all, I turned it on and off about 15 times and it started everytime no issue, than towards the end it just shuts off and won't star back up, it turns over but won't start, I thought I was out of gas maybe even though it looked like a quarter tank at least so I put it on reserve and nothing still, I thought maybe I had flooded it so I left it alone for five hours and still wouldn't star and now my frigging battery is dead, anyone know what it could be? It has never not started before it always runs perfect, than nothing, the lights and fan and everything still came on but it just would not start, it wanted to, I'd appreciate any help or tips at all, on anything about the ds, thanks

Posted

I tried push starting it from where it was stuck out in the woods 3 or 4 times but nothing, we had plenty of speed it should have started, it literally ran perfect and just shut off out of nowhere after not goving us a problem all day

, I ended up having to push it about a mile to my buddies house , that was fun, what a workout, I'm wondering if its just the battery, or maybe the ground wire, or maybe spark plugs, but I dunno I'm not familiar with these atvs, it turns over just no start, if the battery is super old and almost dead I'm wondering if this would prevent it from starting

Posted

Would a dead spot in my starter motor cause my wheeler to just shut off while it was already running though, cus it just shut off out of no where and wouldn't start after that

Posted

And thank you for your help also I appreciate it like I said I'll take in any knowledge about this quad that I possibly can, I'll need to know it all at one point or another

Posted

I had a spark plug crap out on me in my raptor while warming it up. It was like someone flipped a switch, was running fine and just died. Try a new plug, even if it sparks outside the combustion chamber. Under compression can be a different story.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By kevinohio
      When I bought my atv.its missing the air filter.on the parts diagram.it shows the air filter cage separate.but in my air filter box.it looks like it has an air filter cage fastened to air filter box.do I need a air filter cage on top of piece in air box.
       
    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By Zrach
      I wanted to share a successful workaround for a "no-spark" issue on a 2009 LT-A400.
      This is specifically for cases where the CDI has been diagnosed as faulty, but the age or condition of the machine makes the cost of a brand-new OEM unit hard to justify.
      Note: This modification compromises the factory “no-start” circuits.
      On some malfunctioning CDI units the internally damaged circuitry is only partial.
      Feeding full time power to the Parking Brake pin, the unit is triggered to bypass the internal fault and produce a healthy consistent output to the Ignition coil.
      The Modification
      See the second diagram attached below for the wiring specifics.
      The Result:
      The machine has clocked over 1,000km since this repair and is still running strong with no ignition dropouts.
      ⚠️ IMPORTANT SAFETY WARNING ⚠️
      Please be aware that this modification compromises the factory safety "no-start" circuits.
      The machine will now start in gear. The safety interlock involving the handbrake is no longer functional. The machine can move unexpectedly if the starter is pressed while in gear. Proceed at your own risk. If you sell the machine or let others ride it, ensure they are fully aware that these factory safety buffers have been removed.
      Faulty CDI Workaround.pdf
×
×
  • Create New...