Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.

Spencer Cr Ride


Recommended Posts

My buddy decided he HAD to have new Can-Am Renegade X so we needed to get out and break it in. Don afraid to get it dirty.

P1160022-1.jpg

He is not the most experienced rider and we could not talk him into a smaller quad so we came prepared.

P1160026.jpg

What a great place to unload and head up the creek.

P1160028.jpg

Steve with his happy face.

Dec09032.jpg

We made our way through a cinder pit and the boys had to climb it.

P1160037.jpg

Dad refusing to be cold.

P1160036.jpg

Up the creek we found a little snow, some of the roads and trails we have used in the past were blocked off so we made our way the long way around. Here is one of my favorite places to camp and fish, seems like a good place for lunch.

P1160050.jpg

P1160043.jpg

What a crew!

Dec09033.jpg

About to get whacked with a stick for throwing snowballs

P1160057.jpg

We had a great ride back down the other side of the creek and messed around in a play area. Don getting over the new quad feel and decides to get a little dirty.

puddlin.jpg

He soon realizes being wet is cold.

P1160063.jpg

All in all it was a great ride. It is amazing how little snow is here in January.

P1160032.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By Jim Denton
      I was gifted four King Quad 300's, they were used to tow portable snow guns around the slopes. All of the plastics are trashed and racks bent up from rolling down the mountain. The lone Quadrunner is a 98, and will be the initial point of focus, as it reportedly ran before being parked in the field of lost dreams. 




    • By 2003hondaatv
      This Listing is on Ebay as of Jan. 2 ,2023& I am looking to buy ...Does anybody know - what year Range this ECM will fit ??
    • By Valkman
      Hey all, new to the forum.  I just bought a 2001 King Quad, and the clutch is slipping. I adjusted the play with no improvement, so before I go through the trouble of replacing the clutch disc, I want to see if motor oil in it is the problem.  My question is Rotella T4 ok to use? I run in my motorcycles with no issues but I thought I'd get your input.
    • By rgeiser
      just wondering if i pay the thirty dollars how soon will i be able to access the manuals?
    • By geezer99
      Well, I bought the Axis 500 sold at Lowes for $8999 a couple days ago.  This post will be about my impressions as I use, fix, and abuse the machine.  I will add to the post as I gain experience with it.
      Thanks to other posters on this site warning of new machines with loose hardware, one of my first actions was to crawl all over it checking fluids and connections.  Zirks were all freshly greased, fluids in engine, and gear boxes were up to level.  One of the little gas struts that help lift the bed to dump was dangling with only one end connected, and the other strut had not been fully tightened.
      Here are some things I don't like:
      The rear gearbox does not have a differential in it.  It is essentially a solid axle.  Tight turns on lawn will leave tracks, and turns are not as tight on pavement.  In my case this won't matter much, but if you plan to use it on a lawn, this will create tracks on turns.
      To check engine oil you need to remove both front seats and a plastic cover.  This according to the manual.  I'm pretty sure it can be checked with that stuff in place, either from under or above, but that remains to be seen.
      I am not used to a CVT transmission.  I am used to a clutch and multiple gears.  This one requires giving it plenty of gas out of the hole and then backing off to get it to shift up.  I'm sure I will get used to it, but I'd like to be able to take off quietly if I want to.
      The doors have bungie cords to act as springs to close them.  I removed the driver door so I would not need to fight the constant pressure to close.  Problem solved.  I will leave the passenger door as is.  Gotta keep the grandkids safe.
      The status display is hard to read if the sun is on it.
       
      Here is some stuff I like: 
      I was concerned about there being enough torque to slowly climb a steep hill.  There is.  I will elaborate more on this when I've had it on my steeper trails.
      The display has dedicated lights to indicate status of gear position, low oil pressure, over temp, and a bunch of other stuff.  This helps a beginner with feedback that an action taken was successful.
      The sparsity of knobs on the tires dig in well on most surfaces.  I bet they wear out fast on pavement.
      The tilt bed has a tail gate that is easy to operate.  Much like early Japan pickups.
      Steering is responsive and little slack.  Remains to be seen how long to get loose since the u-joints are operating at quite sharp angles.
      Seats are pretty nice.  Will be interesting to see how long it will take me to poke a screw driver though them.
      Seat belts are included to hold grand kids in.  Won't go over 5 mph if both aren't buckled.  Yeah, it works to buckle them empty.  Doing this leaves the belt high on back, so you don't have to sit on it. 
      Hauling it home, my trailer wheel wells were too close together to clear the tires of the UTV.  This required driving it off center a bit, with one set of tires inside the wells and one side driving over the wheel well.  Creeping over the one well required climbing a 10 inch vertical well.  The ability to lock the front axle differential kept both front wheels pulling as I drove the one side up and over the wheel well.  The guys at Lowes were impressed.  They won't touch any but an unobstructed flat trailer loading.
       
      As I gain more experience I will add to this topic,
      tom
       
       
       
       
  • Similar Tagged Content

  • Gallery Images

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...