Quantcast
Jump to content

Recommended Posts

Posted

my 2006 bruin 350 ran great, suddenly it developed problem, it starts great, idles great but when you give it a lot of throttle it breaks down, i checked gas cap and it is fine, where should i start

Posted (edited)

hi and thanks for the helpful info, well i opened the air box to check air filter and low and behold it was 1/4 full of horse feed, mice got in through the air intake, will have to put a screen over that. anyway cleaned it all out being careful not to let anything into the carb, then i sprayed carb cleaner while i gave it throttle, all to no avail. it does seam to be the high speed jet, cause it runs fine until i give 3/4 or moire throttle, so i removed the plastic tank cover, what should i do next, i have taken carbs apart before but want to be very careful, cause i cannot afford to screw this up. also it has kn air filter and it could fit a little tighter so i think it may have sucked up some of the grain dust.

Edited by mgp1
Posted

hi, i got my son to help clean out carb, he is real good with carbs , always has been. anyway we took advice offered here by oxidized_black and cheriah, and cheriah said to pay special attention to the main jet, well you could not see light thru the main jet, we cleaned it and wow does the bruin run now:biggrin: also want to give kudos to my son who dropped the bowl off carb without removing anything except gas tank plastic cover

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...