Quantcast
Jump to content

Recommended Posts

Posted

I bought an aftermarket carb and when I crank the bayou 300 it will idle real high with the choke off. i have trouble shot the choke, i have the idle adjusted right. i can turn it off and crank it back up and the atv will slowly climb back to the same high idle speed. Im stumped along with alot of other mechanics. please help!

Posted

i think about 1994. i bought the carb from a wincycles in miami and have spoken to there technician numerous times. They sent me another carb and i tried it and it done the same thing.

Posted

Also when i try to crank it after it has been setting for a couple of days. i do not choke it or anything! i hit the sarter and it will not crank. i pull the spark plug and it is flooded, i put a dry spark plug in it and it will fire up and run. How can it flood if it has been sitting for a day or so?

Posted

most times it should, but not always. depends how much the overflow can handle too. if the fuel is coming into the bowl fast enough and has 2 ways to move and one way is being used, it will back up into the carb and into the cylinder.

message this lady, she really knows her carbs cheriah's ATV Page » QUADCRAZY ATV Community

i know the basics, but not an expert like she is ... she will definately answer you !!

  • 3 weeks later...
Posted

Hi,

I have been following your post and was wondering if you got your carburetor problems solved. I have the exact same problems and was woundering if you were able to find a solution.

thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By cruteg8
      Does anyone know forsure if u can swap out the Crank Case on a 2001 kawasaki Lakota 300 sport  with a kawasaki Bayou 300 Im seeing yes and no all over some say the mounting position is different so you can't swap the cases but everyother inernal engine part you can swap then im seeing no problem bolts right on can someone plz clarify who knows forsure 
    • By kawasig
      Hello there
      I'm having a problem finding a quality carburetor for a 1993 Suzuki Quad Runner lt-f 250 2x4. I find a lot that have 3-4 star ratings. And all so far don't have the right throttle Cable inlet at the top. The last one I got 4 star on Amazon has a threaded cable sheath rest that could be partially drilled to work. I would prefer to get one I don't have to modify. Any recommendations are greatly appreciated!
    • By sunn
      Maybe someone has the answer to correct a long cranking but did start after maybe 10 seconds?
      Temp was mid 70's, with ATV not run for maybe a month but on battery maintainer with full bat charge noted.  The atv started, but then died a couple times after repeated attempts.  But when run awhile everything was ok.  Although when starting now I do hear the fuel pump humming but seems to take a few ,"long" seconds before full prime pressure.
      Is this typical of a failing fuel pump?
      I've priced a replacement fuel pump on eBay for less than $40 so am tempted to simply replace it for good PM.  Just had all covers off so looks really easy to replace.
      Any ideas?
    • By jen
      Cannot find out why 12 vdc  4 (4) commutator starter motor has no power. It will run full speed without load. But with any load will not turn. Repaired broken brush holder and insulated an internal wire to magnet that was bare and rubbing. cleaned commutator segments. Ohm readings while slowly rotating commutator was 1 ohm.   When attempting to run  with load it will not turn and Bat vdc only pulls down to12vdc. Cannot find an internal wiring schematic.  I can buy a rebuild kit ~$35 but WTH?

×
×
  • Create New...