Quantcast
Jump to content

Recommended Posts

Posted

I bought an aftermarket carb and when I crank the bayou 300 it will idle real high with the choke off. i have trouble shot the choke, i have the idle adjusted right. i can turn it off and crank it back up and the atv will slowly climb back to the same high idle speed. Im stumped along with alot of other mechanics. please help!

Posted

i think about 1994. i bought the carb from a wincycles in miami and have spoken to there technician numerous times. They sent me another carb and i tried it and it done the same thing.

Posted

Also when i try to crank it after it has been setting for a couple of days. i do not choke it or anything! i hit the sarter and it will not crank. i pull the spark plug and it is flooded, i put a dry spark plug in it and it will fire up and run. How can it flood if it has been sitting for a day or so?

Posted

most times it should, but not always. depends how much the overflow can handle too. if the fuel is coming into the bowl fast enough and has 2 ways to move and one way is being used, it will back up into the carb and into the cylinder.

message this lady, she really knows her carbs cheriah's ATV Page » QUADCRAZY ATV Community

i know the basics, but not an expert like she is ... she will definately answer you !!

  • 3 weeks later...
Posted

Hi,

I have been following your post and was wondering if you got your carburetor problems solved. I have the exact same problems and was woundering if you were able to find a solution.

thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Memphis
      Not sure if in right place but here goes
      My 300 is lacking power only reaching 30mph and struggling uphill everything else seems ok other that this problem cleaned all fuel new filter pan and all new fuel pump and spark plug full oil change is there anything I am missing
      ps It is auto and does noy seem to want to get in another gear 5200 rpm at 30mph
       
      Regards
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
×
×
  • Create New...