Quantcast
Jump to content

Recommended Posts

Posted

Hi guys. 1st post. was hoping for some insight. battery is showing 13+ volts. took a small ride a week ago. No issues. went to go start today and nothing at all. Not even on instrument panel. Pull started it and it started with instrument panel flickering the whole time. initially thought battery for whatever reason was dead. Checked it and 13+ volts. Thought maybe if I ran it for awhile it would go back to normal. Keyword "hope". Anyway, not sure whats up. Can do simple mechanics. Is therte any fuses that could be an issue. Also, I had previously,last yr, talked to a mechanic because my belt light is on. He said it needs to be reset. I only have 2000 miles on it. he said it will come on after so many hrs put on quad, Does anybody know how to reset it? Dont want to pay $100 fr reset. Thx to all who reply!

Posted

i would check all the electrical connections, unplug them and make sure not they aren't corroded and plug back in. fuses would probably be ok if you got flicker, they either are blown or good most times. solenoid/starter relay may be bad? try jumping across the posts and see if that gives you anything ... not sure how to reset the belt light, pm ck1999_400ex and he might be able to help you out on that ...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...