Quantcast
Jump to content


1999 Yamaha Bear Tracker 250 - Carb Help .......


Recommended Posts

Hey Everyone,

Im new to the site. I just bought a very used 1999 Yamaha Bear Tracker that I new would need a little TLC. I just bought a new Air filter and changed the oil and differential fluid for it. As soon as I had it together it and put the air filter top on it would not start, as if its not getting air. I took off the lid and it started right up. After a few seconds it started spitting up fuel/foam into the air filter box. I took a video of it. Any thoughts would be helpful. Thanks!

[ame=http://www.youtube.com/watch?v=nVOCPnuRpsQ&feature=g-upl]1999 Yamaha Bear Tracker - YouTube[/ame]

Link to comment
Share on other sites

i would probably first try cleaning the carb thoroughly, making sure the float needle is good. if not get a rebuild kit and replace everything from the kit. that is a ton of fuel coming back ... i would check all the fuel vent lines too. while you are at it, make sure the crankcase vent line is not plugged and check all venting lines, doesn't take too long to do or fix ...

Link to comment
Share on other sites

i'm almost thinking it's a breather tube from the crankcase. i looked on my bikes but i dont have any connections of tubes except for the breather and to the carb. the filter looked like it was in place at the front, and with the amount of discharge coming out, it has to be alot of pressure, like the crankcase not breathing. but the vid is gone now. at first i thought it was oil/mixed/water. not sure mario

Link to comment
Share on other sites

Thats what i was thinking. Im in no way familiar with that bike so thats why i was asking. Wonder if the head gasket or head is shot or cracked and pushing oil/water mix back into the airbox. Or maybe it was underwater and this is the crap coming out.

Im tapping out :-)

Sent from my SGH-T959V using Xparent Blue Tapatalk 2

Link to comment
Share on other sites

Vent lines were pretty clean. I gave it a carb clean and oil change. Seemed to do the trick. I did notice that the previos owner put way to much oil in it. Also, there was some fuel in the oil. Not sure if that was the main problem. Any ideas why that would happen. I think the guy had this sitting for a long time. I hope thats the reason........Not sure though.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By exalrod
      Hello All !
      I am looking for a service manual and wiring diagram for a 2005 50cc Polaris Predator 4 wheeler.
      Could anyone help with this?
    • By Need-help-with-quads
      So I have an 89 Yamaha moto 4 250cc and when I ride it, itll get hot after like 10-15 mins and then will just die and turn off.
      It's has new carb rebuild, new air filter, new battery, new spark plug so I don't think it's a crack in the spark plug
      Can anyone help me?
    • By pitts
      Just joined so I can download a manual and In the process of making my 10 posts.
    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By Brantley11
      Hey everybody,
       
      My proficiency is with Hondas and Yamahas make me see RED!
       
      This bike is my brother in law's, it has 1199 miles on it and went from running great to dead with no start. Every once and a while it will start and sputter for 2 seconds. It is extremely sporadic when it fires but never runs for longer than 3 seconds. 
       
      Here is where we sit:
      Brand New Fully Charged battery
      Carb was cleaned with air hose and carb cleaner then into the ultrasonic cleaner with Aircraft aluminum cleaner
      New Shindy Carb kit (made in Japan version)
      Cleaned out petcock and gas tank
      New 93 Non Ethanol Gas
      New Spark Plug
       
      It gets a spark through the spark test light every time
      Bluish white spark
      When holding the spark plug 1/4" - 3/8" away from head it will jump and spark to the head
      Good Compression
       
      Here are the readings:
       
      Pickup Coil 519 Ohms (range 459-561)
      Charging Coil 266 Ohms (range 270-330)
      Lighting Coil 0.700 (range 0.702-0.858)
      Spark plug Cap 10.58 Ohms (10kohms
      Ignition Coil Primary Coil 0.5 ohms (range 0.18-0.28 ohms)
      Ignition Coil Secondary Coil 8.20 kOhms (range 6.32-9.48 kOhms)
       
      Would y'all think stator and pick up coil, rectifier or CDI are the culprit?
       
×
×
  • Create New...