Quantcast
Jump to content

Recommended Posts

Posted

Going to pick up a 300 2 WD Fourtrax 2000 model I believe. Getting it Saturday for my nephew. The brakes are shot but I hear these things are indestructible. Anybody know of anything I should be on the lookout for? I'll be responsible for maintenance.

Posted

Got the quad. The rear end makes a loud squeaking noise when it moves slowly. Should I change out the rear end oil, and if so, what kind should I use?

Posted

Also might be the rear brake hanging up. Maybe the park brake is adjusted too much. My two yamaha moto 4s always squeeked when riding slow till i resurfaced the rear brake rotor and changed the pads

Sent from my SGH-T989 using Xparent Blue Tapatalk 2

Posted

I checked the rear end and the fluid is black. Can't get the rear wheel off to get to the drain plug off, but I hit it with PB Blaster to loosen it up. I'll check those brakes out. Appreciate the info!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
    • By DexKing
      Good day everyone!
      I am pretty new to ATV/UTV/Small engine repairs and would like input on your absolute must-have specialty tools for maintenance and repairs. Aside from the obvious wrenches and sockets, what are some more specialty type tools you use for troubleshooting? I don't plan to open a repair shop or anything, I just do this as a hobby. Looking forward to your responses!
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By dp19
      Hi, I'm a newbie on here.  I just got a 2007 Suzuki KingQuad LT-A450X.  Are there any specific issues to look for on this model?  Any specific maintenance to do other than the usual oil and filter changes?  
      Thanks
×
×
  • Create New...