Quantcast
Jump to content

Recommended Posts

Posted

if anyone is anywhere near south mississippi, come to exit 31 (canal rd) on interstate 10, the parking area can hold about 300 trucks with trailers, it is approx half mile south of interstate, ITS FREE !!! you dont have to be snorkeled (but it greatly helps) there is deep water, sloppy mud, so many trails there is no way possible to ride em all in one day, almost all bad holes has ways around em if you not set up to take deep water, anyone interested msg me for my phone number to set up times, i ride with one local crew for day rides, an another for night rides, or anytime with just my son and me alone in the woods, open 24/7/365 rain or shine, been riding there almost 20 years, have never seen the bottom of most of these holes, the main trails are big enough for trucks, not many trucks at all can make it though, mostly atv an utv riding, i will gladly be a trail guide totally free, like i said i been riding there forever and there are still trails i havent seen, the trails go from exit 34 to exit 1 probably a couple thousand miles of trails zigzag through these wetlands, its been open for as long as i can remember, rules of the road here, if you bring it in you bring it out!! dont cross paved roads if you see a cop coming (unless you want to run for it and dissappear in the woods) :wink: i dont know anything bout that though,:wink: lmao , then in McHenry ms, there is abandoned gravel pit just off highway 49 south end of stone county, free, also in same area,(pay to ride) sand hill atv park, online for details, sandhillatv.com. in wiggins ms a lil further north is another paid park, really nice one, red creek offroad, online redcreekoffroad.com

Posted
going to try to get video and pics of how we play down here tomorrow, hopefully i can some of my big ride totally submerged coming through some deep stuff

looking forward to seeing that:partyc:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Memphis
      Not sure if in right place but here goes
      My 300 is lacking power only reaching 30mph and struggling uphill everything else seems ok other that this problem cleaned all fuel new filter pan and all new fuel pump and spark plug full oil change is there anything I am missing
      ps It is auto and does noy seem to want to get in another gear 5200 rpm at 30mph
       
      Regards
    • By beast6228
      I've been trying to piece this Lakota 300 back together, slowly. It's been a rabbit hole however. I replace one thing, then it leads to replacing other things. Anyway, When I got this thing I noticed that the hose coming off the camshaft cover wasn't attached to anything, it was just hanging loose. (It's literally just a foot long hose attached to nothing) I figured since it was venting the head it would be ok and I am sure it is.
      However, last night I was looking at the service manual and noticed that it mentioned that this atv has a crankcase breather tube as well. Mine does not have one, so I looked at Partzilla and looked at the parts diagram and sure enough, it's definitely supposed to have one. The problem however is, the service manual does not show how it hooks up and the parts diagram only shows the exploded view of the assembly. I just find that kind of strange, nowhere in the manual does it show how it connects. Does it have it connector, attach to a nipple? It just doesn't say and it bothers me that there is a hole there without anything attached to it.  If anyone has a Bayou 300 or Lakota 300 with an intact breather vent system and could possibly take some clear photos of it or know how it connects I would be very grateful. I have searched high and low and cannot find any information on it.
       
      Thanks


    • By Ajmboy
      View File 1986-2006 Kawasaki Bayou 300 service manual
      This service manual is for a 1986-2006 Kawasaki Bayou 300.
      Adding to downloads library.
      Submitter Ajmboy Submitted 05/11/2018 Category Kawasaki ATV  
×
×
  • Create New...