Quantcast
Jump to content

Recommended Posts

Posted

i have a 99 400 ex with a big bore kit. I bought a new stage 2 hot cam for it and got the timing right. it cranks over but won't start. Looking at it today a little more...i think i have a bent valve. I pit the compression tool on it and only have 25ftpnds. not sure how to fix that. Nor do i have the tools. Also, i noticed that there are double springs on it too.is that normal?

Posted
i have a 99 400 ex with a big bore kit. I bought a new stage 2 hot cam for it and got the timing right. it cranks over but won't start. Looking at it today a little more...i think i have a bent valve. I pit the compression tool on it and only have 25ftpnds. not sure how to fix that. Nor do i have the tools. Also, i noticed that there are double springs on it too.is that normal?

A bent valve will definately cause that problem. If it is not sealing you won't get compression. As far as how to fix it I am sure Oxidized_Black has a pdf link for the manual listed and you can see what it will involve from there. Good luck and keep us posted with progress.

Posted
thank you everyone who led me to the right person to get what i needed. You guys are awesome. Now i have the manual...i can get my quad up and running:) I'll be working on it tomorrow mornin

That's what we do here at Quadcrazy. :yes:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
×
×
  • Create New...