Quantcast
Jump to content


2007 Yamaha Raptor 700 - Clutch/Transmission


GREENIE

Recommended Posts

:aargh:Went to go for a ride today. Started up the road and noticed i didnt have much power. In first gear its fine but all the other ones it dont have any power. when i let the clutch out it is almost to the end that it finally catches. im hoping that it is a clutch and not the transmission. Could use whatever input i can get.:mad:

Link to comment
Share on other sites

well i thought it just needed adjusted and now it wont even engage so it must be the clutch. the last poker run must have really don it in. it was really wet and muddy. towards the end it started acting up went i let the clutch out it would shut the engine off. it must have finally went all the way. so what kind of clutch kit do you recommend. i found a wiseco kit for $89 and an EBC for $99. barrnett and hinson are almost $200 . just wondering if they were worth it or if the cheaper kits were ok.

Link to comment
Share on other sites

I would do a search for reviews on each brand barrnett & hinson are used by most pro riders for racing and are worth the money if your racing. Most products that are used in racing is built to with stand more punishment & give better performance. For wiseco & ebc I would try and find reviews on the net and see what customers have to say. If a 89 or 99 dollar kit will work for what you need I don't see spending 200.00 dollars. If a product improves the performance it's going to cost more but that dosn't mean it will last longer than a product that cost less just do some research. And this is a great site for info out of all the members I'm sure someone has used the brands you listed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
    • By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





    • By Its-always-something
      Have a 1998 AC 300 2x4, Just installed a new carburetor. Engine starts easy but the choke RPMs are very hi and take along time (5-10 mins when cold out). After engine has warmed up choke releases and it idles and runs fine., It does no have an electric choke. The choke lever is never used and it seems like an auto choke? Long story short, how can I lower the choke rpm levels?
       
      Also, carb came with a spare145 jet, not 100% sure what is installed. Could this impact choke RPMs?
       
       
      Any help and information greatly appreciated.
    • By DarkRider
      This is something I'm extremely curious about. Has anyone ever attempted to buy a quad (or any other vehicle) from an impound lot? I've always wondered if this could be a bargain, or a waste of time. Google searches do turn up some helpful results. Looks like the state of NJ holds auctions online which I'd be a bit hesitant about.
       
      My online searches haven't really turned up any results of anyone buying an ATV this way. I'd be really curious if anyone tried this, or knows someone who has. I've actually found a couple pages with online auctions for my state, but none had ATVs.
    • By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
×
×
  • Create New...