Quantcast
Jump to content

Recommended Posts

Posted

hello to all...HI...

well im new to the quad scene and now im lovin it. i just got a 97 honda trx 300ex. when i got it,it ran ok. so ive put in a carb kit,spark plug,new rear wheels and tires adjusted the clutch but it still feels slugish..why??? i know im new to this but damn!!!

my next step is to rebuild all the gaskets on the motor as i do leak oil.and i seem to have a gass leak somewhere. can someone help me out and point me to the right direction???

also, is there anyone in the area close that knows of good ridin trails round here??

Posted

Is it all stock meaning no aftermarket pipe, air filter? You said you rebuilt the carb if you have an aftermarket pipe , performance air filter stock jetting won't work and it will not run like it should. You said it ran ok when you got it is it running worse now after the work. How did the old spark plug look & have you pulled the new plug back out and checked how it looks. A plug can tell you alot about how the motor is running. Rich or lean , burning oil etc. A compression check would help too & if the motor checks out ok I would look into the clutch if the clutch is slipping thats where your losing you get up & go. What are you comparing your quad too to say it feels sluggish it's self from how it ran when you got it or form other quads?

Posted

hey there...hi...

all is stock. i know this quad has seen better days.the slugish feeling is from what it was to now. so many carb issues. again, im new to this . dont know how and what to do to it.and now i think that starter is going.today i ran it to see how the carb kit helped. and it broke down again. the throttle body came loose. i fixed that and it drove for bout 10 minutes and it turned off again. now its getting too much gas. what a head ache...

Posted

I think I would do the compression check before sinking in money trying to fix it. If all checks out good then it may be worth getting a carb. Some carbs can be beyond rebuilding. I went thru the same thing on a Honda xr100 I ended up getting a Mikuni carb for for 38 bucks new but now I have other problems it jumped time. So it seems to have turned into a money pit. Good luck and lets know how it goes.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
×
×
  • Create New...