Quantcast
Jump to content


help a brother out


hevar

Recommended Posts

hey

thanks for all inputs on my issue

my problem is with my kawaski ranger year i don' know , there is something wrong with it and my best bet is the clutch and the engine shuts down after a couple of minutes when in drive gear , i removed it and here is some picture of it , i think there is something with the springs inside but you guys could please take a look at them , thank you so much

From_Kaftan_s_i_Phone_6.jpg

From_Kaftan_s_i_Phone_4.jpg

From_Kaftan_s_i_Phone_5.jpg

From_Kaftan_s_i_Phone_8.jpg

Edited by hevar
Link to comment
Share on other sites

I am not a mechanic so I am really only throwing ideas out for you. I think if the problem was with the clutch binding it would be easy to spot by the belt slipping. How long does it run before it shuts down? Does it fire right back up after it shuts off or do you have to let it cool down?

Link to comment
Share on other sites

I am not a mechanic so I am really only throwing ideas out for you. I think if the problem was with the clutch binding it would be easy to spot by the belt slipping. How long does it run before it shuts down? Does it fire right back up after it shuts off or do you have to let it cool down?

thanks for the input man ,i found out that its a kawasaki mule 550 2004 , and it is the drive and driven converter that are both broken now , so i don't know , should i be looking for new parts to buy , or is it fixbale , do you know any website that sells mule parts ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By N00bie
      From Arkansas. Just bought a 2012 Gator 850i RSX because I could not pass up the price. BUT it has an idle problem. So, to be honest, I joined just to get a service manual. I have a choice: 1)Buy a hard copy: ~$100; 2)Buy a CD ~$35.00; Get a direct download for free posting 10 times; or get a download for $29.00 (subscription). Haven't decided what to do yet.
    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





×
×
  • Create New...