Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

BCreekFarm

Brushy Creek's Ironman Enduro $1000

Recommended Posts

Due to lack of interest for the enduro race, we at Brushy Creek Motor Farm have decided

to open the race to all quads. Whether you have a sport bike or a 4 wheel drive, the race

is now open to both.

The rules and regulations for the race have not changed and you can obtain a copy of

those on our website at BRUSHY CREEK MOTOR FARM

Thank you from everyone at Brushy Creek Motor Farm

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Gilbey
      I just bought a Sunl 2007 250 2x4 ATV and am going change oil in motor and rear end, any recommendations for products and instructions, as I have no owners manual. Oil is probably pretty simple and am guessing rear end is pump out and refill. Some specs would be nice to amounts of fluids.
      Thanks.
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Brantley40
      Anyone out there spice up their 2002 Kawasaki Lakota Sport 300 with cam, shaved head, deck the jug, valves?
      As you probably have already seen, I have a top end to get built back up and might as well add a little kick to it. Here's a pic of a golf cart I built up recently and modified the engine a little while I had it apart.
      Thanks in advance for everyone's help!!

    • By Frank Angerano
      So here’s a question. I have seen a few members that have recently purchased a used bike.   Also a HUGE amount of so called new members who have purchased a used bike and have come here “just here for a manual”.
      Some have been disappointed with the bikes and or knew they were getting a broken bike with some mechanical  experience thinking hey I can fix it.   So here’s my take on buying a used bike. Anyone who has followed some of mine and other members posts about what to look for when buying a used bike here’s a few pointers on what to look for. 
      1. I always check the oil and look for moisture, metal shavings and color. 
      2. Feel the compression or take a compression tester with you. 
      3. Check for spark (if the bikes not running)
      4. Take a small jumper pack to verify that the starter cycle works and the bike cranks.
      5. Look for bent or cracked frame/welding that was done on the frame from maybe a wreck.
      5. Mismatch plastics by looking under neath.  
      7. Bolts on the engine/frame that look like they are stripped from someone taking the bike apart. 
      8. Any kind of scilicone or gasket adhesive that was used on a cover plate or engine seem where the engine was taken apart.  
      9. Patches on the exhaust pipes with sheet metal or jb weld patch material.  
      10. Wiring messes on the harness like bundles of tape where the harness was opened up and taped up  for an after market device or just plain butchered up.  
      11. Put the bike in gear (running or not) and roll the bike back and forth to see that the gears work and you feel resistance like the engine is trying to spin while pushing it forward as if you were push starting it   
      12. I keep a vin# decoder website on my phone as a favorite to double check the year of the bike .
      All though nothing is fool proof these tips will help you along while buying a used bike. Not only that but  it will help you negotiate a fair price for a bike that may have one of the above problems.  
      I have minimized this entire process down to about 15 mins. I buy all the time so I don’t expect you to do the same or have a compression tester etc but use some of these tips when buying and go into the purchase with confidence! 
      I would like to hear anyone else that has any input on buying a bike and what to  look for! 
       
    • By pokerl0w
      To start it off, I'd like to share the bakery display cases I made for my wife. I'm sure ya'll have some impressive stories behind those HF tools, let's see 'em!
       
      I built these bakery display cases for wife on almost 100% HF tools a couple years ago. Only thing I bought from Home Depot was the wood/plywood/stains and 3 sawhorses for my workbench. Router, circsaw, blades for both, sander, sandpaper, gloves, the nails for the nailgun (gun borrowed from dad, have a 5# pancake for air) I had almost zero tools to start.
      Some of their cheap "speed" clamps failed, but first time for me using those types of clamps, was expecting them to hold better:

      heh my youngest helping my dad glue:

      and for fun, here was the finished project (1 of 2, built 2 cases, this is the smaller .. the plastic was from Tap Plastics for the "sneeze guards" and the top case):

      back side showing both cases:

       

       
       
  • Similar Tagged Content

    • By Scott270R
      Just wanted to let all quad riders / racers know there is a oval dirt track race this sunday at Beever Creek Raceway. I spoke with the promoter and no special tires are required so if your curious or have been taking a break from racing, come on down and check it out.
      Home Page
      The website has the wrong date listed. The race will be on Sunday the 27th, not Saturday the 26th as listed on the beevercreekspeeday site.
      please see
      https://www.facebook.com/TNValleyflattrackers
      Hope to see you there!........ On SUNDAY
    • By LostInPa
      I couldn't ride....

      So I decided to go out and shoot an enduro and hare scramble. Good times...
      Michaux Enduro, PA
      Americas oldest enduro




      Family at checkpoint

      Dad new bike...

      Rausch Creek State Championship Hare Scramble











    • By quadcrazy
      This video was submitted to the QUADCRAZY Video section by Ajmboy.
      Description of Video: snorkelin' in a creek in tennessee, honda rincon, arctic cat 700 efi, deep water,great download, must see!
      Video Tags: deep water mud bogging atv
      http://www.quadcrazy.com/video/video/&v=118073387931
    • By quadmaniac
      [ame=http://www.youtube.com/watch?v=lm-ZWkgNOlw&feature=related]YouTube - Rzr Creek Climbing[/ame]
    • By jbowman7
      Windrock is an awesome place to ride.
      They have seasonal jamborees with contests.
      It is soo fun!
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...